iSCSI/luns/check-condition

[Danny Braniss]

> Danny,
> 
> LUN 1 should not be returning a chk condition in response to an INQUIRY
> command with the page code and EVPD both 0 in the cdb.  The device
> server should return the inquiry response data with the peripheral
> device qualifier set to 001b or 011b (1 or 3) per the scsi specs.
> 
> Bill
> 
hi Bill, 
  that's 'wishfull thinking' :-), I can only fix the initiator, the target
  I have to live with :-(
	danny

> -----Original Message-----
> From: owner-freebsd-scsi at freebsd.org
> [mailto:owner-freebsd-scsi at freebsd.org] On Behalf Of Kenneth D. Merry
> Sent: Thursday, August 24, 2006 11:15 AM
> To: Danny Braniss
> Cc: scsi at freebsd.org
> Subject: Re: iSCSI/luns/check-condition
> 
> On Thu, Aug 24, 2006 at 18:05:41 +0300, Danny Braniss wrote:
> > hi,
> > 	this target (Wasabi) is returning Check Condition for
> > a INQ. LUN 1, (which probably is ok,  since it does not exist), I
> return
> > 	ccb_h->status = CAM_SCSI_STATUS_ERROR;
> > but it seems that the CAM is ignoring it, since it will try again, and
> > again, etc. [or i'm doing something wrong :-]
> 
> If this is a result of the inquiry on initial probe (most likely), you
> shouldn't get any more than 4 retries.
> 
> What SCSI status byte, sense key, ASC and ASCQ are you returning?
> 
> Ken
> --
> Kenneth Merry
> ken at FreeBSD.ORG
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
> 
>