unsubscribe freebsd-scsi

Wed Apr 26 08:29:09 UTC 2006

Здравствуйте, majordomo.

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RC #2: Tue Apr 25 15:33:24 MSD 2006
    dread at ftp1.zelnet.ru:/usr/obj/usr/src/sys/ftp1
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.01-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  Logical CPUs per core: 2
real memory  = 2147352576 (2047 MB)
avail memory = 2066108416 (1970 MB)
ACPI APIC Table: <A M I  OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem 0xdedc0000-0xdedcffff,0xdedb0000-0xdedbffff irq 26 at device 5.0 on pci2
mpt0: [GIANT-LOCKED]
mpt0: MPI Version=1.2.14.0
mpt0: Unhandled Event Notify Frame. Event 0xa.
mpt0: Capabilities: ( RAID-0 SAFTE )
mpt0: 0 Active Volumes (1 Max)
mpt0: 0 Hidden Drive Members (6 Max)
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem 0xdedf0000-0xdedfffff,0xdede0000-0xdedeffff irq 25 at device 5.1 on pci2
mpt1: [GIANT-LOCKED]
mpt1: MPI Version=1.2.14.0
mpt1: Unhandled Event Notify Frame. Event 0xa.
mpt1: Capabilities: ( RAID-0 SAFTE )
mpt1: 0 Active Volumes (1 Max)
mpt1: 0 Hidden Drive Members (6 Max)
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xdc00-0xdc3f mem 0xdeea0000-0xdeebffff irq 54 at device 4.0 on pci3
em0: Ethernet address: 00:04:23:bc:ea:26
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xdc80-0xdcbf mem 0xdeee0000-0xdeefffff irq 55 at device 4.1 on pci3
em1: Ethernet address: 00:04:23:bc:ea:27
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
drm0: <Rage XL> port 0xec00-0xecff mem 0xdf000000-0xdfffffff,0xdefff000-0xdeffffff irq 17 at device 12.0 on pci4
info: [drm] Initialized mach64 1.0.0 20020904
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem 0xc0000-0xca7ff,0xca800-0xce7ff,0xce800-0xcf7ff,0xcf800-0xd07ff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.333 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <SAMSUNG CD-ROM SN-124/N102> at ata0-slave UDMA33
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
da0 at mpt1 bus 0 target 0 lun 0
da0: <Demon SA -16U4P R0.0> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged Queueing Enabled
da0: 2097144MB (4294950912 512 byte sectors: 255H 63S/T 267348C)
Trying to mount root from ufs:/dev/da0s1a
em0: link state changed to UP
em1: link state changed to UP

(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 13 89 c7 3c 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)
(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 13 8a 2b bc 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)
(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 10 a6 76 3c 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)
(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 10 b0 a1 bc 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)
(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 13 c8 c2 bc 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)
(da0:mpt1:0:0:0): WRITE(10). CDB: 2a 0 14 18 93 bc 0 0 80 0
(da0:mpt1:0:0:0): CAM Status: SCSI Status Error
(da0:mpt1:0:0:0): SCSI Status: Check Condition
(da0:mpt1:0:0:0): ABORTED COMMAND asc:47,0
(da0:mpt1:0:0:0): SCSI parity error
(da0:mpt1:0:0:0): Retrying Command (per Sense Data)

I ran "dd bs=65536 if=/dev/da2e of=/dev/null" which completed successfully, reading all 2T with no errors. 

-- 
С уважением,
 Плаксюк Дмитрий Викторович
 Cлужба технической поддержки Городской сети: т. (095) 530-3101                          mailto:pldv at sinstelecom.net