Qlogic ISP 2200, DL-380 and EVA 5000 SAN; how?

[Matthew Jacob]

And just reconfirming- a 'camcontrol rescan 3:0:1'  does *not* see the disk?


On Fri, 25 Feb 2005 14:52:12 +0100, Morten Liebach <m at mongers.org> wrote:
> On 2005-02-24 12:49:48 -0800, Matthew Jacob wrote:
> > > > Or give us a /proc/scsi/scsi output dump?
> > >
> > > No such file. (And yes, /proc is mounted).
> >
> > I meant from the linux box.
> 
> $ cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 3010
>  Type:   Unknown                          ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 3020
>  Type:   Unknown                          ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 00 Lun: 01
>  Vendor: COMPAQ   Model: HSV110 (C)COMPAQ Rev: 3020
>  Type:   Direct-Access                    ANSI SCSI revision: 02
> 
> > > > Can you tell us the connection topology other than "same SAN"?
> > >
> > > A fiber goes straight from the SAN, a HP StorageWorks HSV 110 box, to a
> > > HP StorageWorks SAN Switch 2/8-EL, to which the Qlogic HBA is connected.
> >
> > Have you tried direct connect?
> 
> Can't be done, it's our production environment and there's no ports
> free.
> 
> Have a nice day
>                                 Morten
> 
> --
> http://m.mongers.org/weblog/
> __END__
>