AIC-7902 ws Seagete drive problem
Mike Okun
okun at ariadnamedia.ru
Sun Feb 20 14:56:48 PST 2005
Hello,
I have got the Supermicro X6DHP-8G (E7520) based server with onboard
Adaptec AIC7902 SCSI controller and trying to install FreeBSD 5.3 on
it. Into channel A two Seagete drives (ST336607LC and ST373307LC) are
plugged.
Installation CD boots only in safe mode, SCB timout errors appears
from time to time and also reflected in dmesg.
Is there the issue with ahd driver or it is the issue with Seagete
disks or settings?
dmesg output:
kernel boot file is /boot/kernel/kernel
mfdev=1
cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3595, revid=0x0c
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3597, revid=0x0c
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3599, revid=0x0c
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x4018, cachelnsz=8 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 00001400, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24d2, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[20]: type 4, range 32, base 00001420, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x24d4, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=19
map[20]: type 4, range 32, base 00001440, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d7, revid=0x02
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=18
map[20]: type 4, range 32, base 00001460, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x24de, revid=0x02
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
map[10]: type 1, range 32, base dd000000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x24dd, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=23
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 000014a0, size 4, enabled
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001100, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 3
pcib1: I/O decode 0x2000-0x3fff
pcib1: memory decode 0xdd100000-0xdd3fffff
pcib1: prefetched decode 0xfff00000-0xfffff
pcib1: could not get PCI interrupt routing table for \_SB_.PCI0.PEX0 - AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=1, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd100000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xdd100000-0xdd100fff
found-> vendor=0x8086, dev=0x0326, revid=0x09
bus=1, slot=0, func=1
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=1, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base dd101000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xdd101000-0xdd101fff
found-> vendor=0x8086, dev=0x0327, revid=0x09
bus=1, slot=0, func=3
class=08-00-20, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x2000-0x2fff
pcib2: memory decode 0xdd200000-0xdd2fffff
pcib2: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 4, range 32, base 00002400, size 8, enabled
pcib2: device (null) requested decoded I/O range 0x2400-0x24ff
pcib1: device (null) requested decoded I/O range 0x2400-0x24ff
map[14]: type 1, range 64, base dd200000, size 13, enabled
pcib2: device (null) requested decoded memory range 0xdd200000-0xdd201fff
pcib1: device (null) requested decoded memory range 0xdd200000-0xdd201fff
map[1c]: type 4, range 32, base 00002000, size 8, enabled
pcib2: device (null) requested decoded I/O range 0x2000-0x20ff
pcib1: device (null) requested decoded I/O range 0x2000-0x20ff
pcib2: matched entry for 2.2.INTA
pcib2: slot 2 INTA hardwired to IRQ 32
found-> vendor=0x9005, dev=0x801d, revid=0x10
bus=2, slot=2, func=0
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=a, irq=32
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type 4, range 32, base 00002c00, size 8, enabled
pcib2: device (null) requested decoded I/O range 0x2c00-0x2cff
pcib1: device (null) requested decoded I/O range 0x2c00-0x2cff
map[14]: type 1, range 64, base dd202000, size 13, enabled
pcib2: device (null) requested decoded memory range 0xdd202000-0xdd203fff
pcib1: device (null) requested decoded memory range 0xdd202000-0xdd203fff
map[1c]: type 4, range 32, base 00002800, size 8, enabled
pcib2: device (null) requested decoded I/O range 0x2800-0x28ff
pcib1: device (null) requested decoded I/O range 0x2800-0x28ff
pcib2: matched entry for 2.2.INTB
pcib2: slot 2 INTB hardwired to IRQ 33
found-> vendor=0x9005, dev=0x801d, revid=0x10
bus=2, slot=2, func=1
class=01-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns)
intpin=b, irq=33
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2000-0x20ff,0x2400-0x24ff mem 0xdd200000-0xdd201fff irq 32 at device 2.0 on pci2
ahd0: Defaulting to MEMIO on
ahd0: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd200000
ahd0: Reading VPD from SEEPROM...ahd0: VPD parsing successful
ahd0: Reading SEEPROM...done.
ahd0: STPWLEVEL is on
ahd0: Manual Primary Termination
ahd0: Manual Secondary Termination
ahd0: Primary High byte termination Enabled
ahd0: Primary Low byte termination Enabled
ahd0: Secondary High byte termination Disabled
ahd0: Secondary Low byte termination Disabled
ahd0: Downloading Sequencer Program... 696 instructions downloaded
ahd0: Features 0x3c101, Bugs 0x740002, Flags 0x43f1
ahd0: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port 0x2800-0x28ff,0x2c00-0x2cff mem 0xdd202000-0xdd203fff irq 33 at device 2.1 on pci2
ahd1: Defaulting to MEMIO on
ahd1: Reserved 0x2000 bytes for rid 0x14 type 3 at 0xdd202000
ahd1: Reading VPD from SEEPROM...ahd1: VPD parsing successful
ahd1: Reading SEEPROM...done.
ahd1: STPWLEVEL is on
ahd1: Manual Primary Termination
ahd1: Manual Secondary Termination
ahd1: Primary High byte termination Enabled
ahd1: Primary Low byte termination Enabled
ahd1: Secondary High byte termination Disabled
ahd1: Secondary Low byte termination Disabled
ahd1: Downloading Sequencer Program... 696 instructions downloaded
ahd1: Features 0x3c101, Bugs 0x740002, Flags 0x43f0
ahd1: [GIANT-LOCKED]
aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x3000-0x3fff
pcib3: memory decode 0xdd300000-0xdd3fffff
pcib3: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
map[10]: type 1, range 64, base dd300000, size 17, enabled
pcib3: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
pcib1: device (null) requested decoded memory range 0xdd300000-0xdd31ffff
map[20]: type 4, range 32, base 00003000, size 6, enabled
pcib3: device (null) requested decoded I/O range 0x3000-0x303f
pcib1: device (null) requested decoded I/O range 0x3000-0x303f
pcib3: matched entry for 3.2.INTA
pcib3: slot 2 INTA hardwired to IRQ 54
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=3, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=54
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type 1, range 64, base dd320000, size 17, enabled
pcib3: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
pcib1: device (null) requested decoded memory range 0xdd320000-0xdd33ffff
map[20]: type 4, range 32, base 00003040, size 6, enabled
pcib3: device (null) requested decoded I/O range 0x3040-0x307f
pcib1: device (null) requested decoded I/O range 0x3040-0x307f
pcib3: matched entry for 3.2.INTB
pcib3: slot 2 INTB hardwired to IRQ 55
found-> vendor=0x8086, dev=0x1079, revid=0x03
bus=3, slot=2, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0117, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
intpin=b, irq=55
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3000-0x303f mem 0xdd300000-0xdd31ffff irq 54 at device 2.0 on pci3
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd300000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3000
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:30:48:2c:41:de
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port 0x3040-0x307f mem 0xdd320000-0xdd33ffff irq 55 at device 2.1 on pci3
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xdd320000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x3040
em1: [MPSAFE]
em1: bpf attached
em1: Ethernet address: 00:30:48:2c:41:df
em1: Speed:N/A Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci4: <ACPI PCI bus> on pcib4
pci4: physical bus=4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci5: <ACPI PCI bus> on pcib5
pci5: physical bus=5
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x1400-0x141f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1400
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x1420-0x143f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1420
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x1440-0x145f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1440
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x1460-0x147f irq 16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1460
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdd000000-0xdd0003ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xdd000000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
ehci_pci_attach: companion usb3
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib6: secondary bus 6
pcib6: subordinate bus 6
pcib6: I/O decode 0x4000-0x4fff
pcib6: memory decode 0xdd400000-0xdeffffff
pcib6: prefetched decode 0xfff00000-0xfffff
pcib6: Subtractively decoded bridge.
ACPI PCI link initial configuration:
pci6: <ACPI PCI bus> on pcib6
pci6: physical bus=6
map[10]: type 1, range 32, base de000000, size 24, enabled
pcib6: device (null) requested decoded memory range 0xde000000-0xdeffffff
map[14]: type 4, range 32, base 00004000, size 8, enabled
pcib6: device (null) requested decoded I/O range 0x4000-0x40ff
map[18]: type 1, range 32, base dd400000, size 12, enabled
pcib6: device (null) requested decoded memory range 0xdd400000-0xdd400fff
pcib6: matched entry for 6.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=6, slot=1, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pci6: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0x14a0-0x14af,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x14a0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0-master: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0-slave: stat=0x01 err=0x01 lsb=0x01 msb=0x01
ata0: reset tp2 stat0=01 stat1=01 devices=0x0
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
ichsmb0: <Intel 82801EB (ICH5) SMBus controller> port 0x1100-0x111f irq 17 at device 31.3 on pci0
ichsmb0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1100
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x8001 0x8011 0x8001 0x8001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0x8001 0x8009 0x8001 0x8001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134592 -> 100000
procfs registered
Timecounter "TSC" frequency 3400133824 Hz quality -100
Timecounters tick every 10.000 msec
lo0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH5 chip
ata1-master: setting UDMA33 on Intel ICH5 chip
acd0: <CD-224E/1.9A> CDROM drive at ata1 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahd0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
(noperiph:ahd1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
ahd0: Selection Timeout on A:0. 0 SCBs aborted
ahd1: Selection Timeout on A:0. 0 SCBs aborted
ahd0: Selection Timeout on A:1. 0 SCBs aborted
ahd1: Selection Timeout on A:1. 0 SCBs aborted
ahd0: Selection Timeout on A:2. 0 SCBs aborted
ahd1: Selection Timeout on A:2. 0 SCBs aborted
ahd0: Selection Timeout on A:3. 0 SCBs aborted
ahd1: Selection Timeout on A:3. 0 SCBs aborted
ahd0: Selection Timeout on A:4. 0 SCBs aborted
ahd1: Selection Timeout on A:4. 0 SCBs aborted
ahd0: Selection Timeout on A:5. 0 SCBs aborted
ahd1: Selection Timeout on A:5. 0 SCBs aborted
ahd0: Selection Timeout on A:8. 0 SCBs aborted
ahd1: Selection Timeout on A:6. 0 SCBs aborted
ahd0: Selection Timeout on A:10. 0 SCBs aborted
ahd1: Selection Timeout on A:8. 0 SCBs aborted
ahd0: Selection Timeout on A:12. 0 SCBs aborted
ahd1: Selection Timeout on A:9. 0 SCBs aborted
ahd0: Selection Timeout on A:13. 0 SCBs aborted
ahd1: Selection Timeout on A:10. 0 SCBs aborted
ahd0: Selection Timeout on A:14. 0 SCBs aborted
ahd1: Selection Timeout on A:11. 0 SCBs aborted
ahd0: Selection Timeout on A:15. 0 SCBs aborted
(probe8:ahd0:0:9:0): Retrying Command
(probe10:ahd0:0:11:0): Retrying Command
(ahd0:A:9:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
Interrupt storm detected on "irq16: uhci0 uhci3"; throttling interrupt source
ahd1: Selection Timeout on A:12. 0 SCBs aborted
(ahd0:A:9:0): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 9 using 16bit transfers
ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
(ahd0:A:11:0): Sending PPR bus_width 1, period 8, offset fe, ppr_options ff
(ahd0:A:11:0): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 11 using 16bit transfers
ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
ahd0: Invalid Sequencer interrupt occurred.
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x23b Mode 0x0
Card was paused
INTSTAT[0x0] SELOID[0xb] SELID[0x90] HS_MAILBOX[0x0]
INTCTL[0x80]:(SWTMINTMASK) SEQINTSTAT[0x0] SAVED_MODE[0x11]
DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0] SCSIBUS[0x0]
LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE) SCSISEQ0[0x0]
SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI) SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x3]
KERNEL_QFREEZE_COUNT[0x3] MK_MESSAGE_SCB[0xff00] MK_MESSAGE_SCSIID[0xff]
SSTAT0[0x0] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0]
SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO) LQISTAT0[0x0]
LQISTAT1[0x0] LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0]
LQOSTAT2[0x0]
SCB Count = 16 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x9 NEXTSCB 0xff80
qinstart = 39 qinfifonext = 39
QINFIFO:
WAITING_TID_QUEUES:
Pending list:
Total 0
Kernel Free SCB list: 9 7 5 1 2 3 4 6 8 10 11 12 13 14 15 0
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
ahd0: FIFO0 Free, LONGJMP == 0x8000, SCB 0x7
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
ahd0: FIFO1 Free, LONGJMP == 0x8063, SCB 0x9
SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO) SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]:(SG_CACHE_AVAIL)
LQIN: 0x8 0x0 0x0 0x7 0x0 0x1 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
ahd0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x42
ahd0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
ahd0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
CCSCBCTL[0x4]:(CCSCBDIR)
ahd0: REG0 == 0xece9, SINDEX = 0x10e, DINDEX = 0x118
ahd0: SCBPTR == 0x7, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff30
CDB 12 20 0 80 88 ba
STACK: 0x236 0x2 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
ahd0: target 9 using 8bit transfers
ahd0: target 9 using asynchronous transfers
ahd0: target 11 using 8bit transfers
ahd0: target 11 using asynchronous transfers
ahd1: Selection Timeout on A:13. 0 SCBs aborted
ahd1: Selection Timeout on A:14. 0 SCBs aborted
ahd1: Selection Timeout on A:15. 0 SCBs aborted
(ahd0:A:9:2): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
(ahd0:A:9:2): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 9 using 16bit transfers
ahd0: target 9 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
(probe0:ahd0:0:9:2): Request Requeued
(probe0:ahd0:0:9:2): Retrying Command
(ahd0:A:11:1): Sending PPR bus_width 1, period 8, offset 3f, ppr_options ff
(ahd0:A:11:1): Received PPR width 1, period 8, offset 3f,options ff
Filtered to width 1, period 8, offset 3f, options ff
ahd0: target 11 using 16bit transfers
ahd0: target 11 synchronous with period = 0x8, offset = 0x3f(RDSTRM|DT|IU|RTI|QAS)
(probe1:ahd0:0:11:1): Request Requeued
(probe1:ahd0:0:11:1): Retrying Command
pass0 at ahd0 bus 0 target 6 lun 0
pass0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
pass0: Serial Number 1
pass0: 3.300MB/s transfers
pass1 at ahd0 bus 0 target 9 lun 0
pass1: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
pass1: Serial Number 3JA9SY5300007516JBPE
pass1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
pass2 at ahd0 bus 0 target 11 lun 0
pass2: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
pass2: Serial Number 3HZ0RBHT000074423ZKC
pass2: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
ses0 at ahd0 bus 0 target 6 lun 0
ses0: <SUPER GEM318 0> Fixed Processor SCSI-2 device
ses0: Serial Number 1
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
Copied 18 bytes of sense data offset 12: 0x70 0x0 0x6 0x0 0x0 0x0 0x0 0xa 0x0 0x0 0x0 0x0 0x29 0x2 0x2 0x0 0x0 0x0
(da0:ahd0:0:9:0): Retrying Command
(da1:ahd0:0:11:0): Retrying Command
da0 at ahd0 bus 0 target 9 lun 0
da0: <SEAGATE ST336607LC 0007> Fixed Direct Access SCSI-3 device
da0: Serial Number 3JA9SY5300007516JBPE
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
da1 at ahd0 bus 0 target 11 lun 0
da1: <SEAGATE ST373307LC 0007> Fixed Direct Access SCSI-3 device
da1: Serial Number 3HZ0RBHT000074423ZKC
da1: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled
da1: 70007MB (143374744 512 byte sectors: 255H 63S/T 8924C)
GEOM: new disk da0
GEOM: new disk da1
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x07000000 VER: 0x00050014 LDR: 0x08000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x00050014 LDR: 0x02000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x04000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
ioapic1: routing intpin 8 (PCI IRQ 32) to cluster 0
ioapic1: routing intpin 9 (PCI IRQ 33) to cluster 0
ioapic2: routing intpin 6 (PCI IRQ 54) to cluster 0
ioapic2: routing intpin 7 (PCI IRQ 55) to cluster 0
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:71665902
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 32256 length 36692941824 end 36692974079
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:143363997
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da1s1, start 32256 length 73402366464 end 73402398719
GEOM: Configure da1s1a, start 0 length 268435456 end 268435455
GEOM: Configure da1s1b, start 268435456 length 4267474944 end 4535910399
GEOM: Configure da1s1c, start 0 length 73402366464 end 73402366463
GEOM: Configure da1s1d, start 4535910400 length 268435456 end 4804345855
GEOM: Configure da1s1e, start 4804345856 length 268435456 end 5072781311
GEOM: Configure da1s1f, start 5072781312 length 68329585152 end 73402366463
Mounting root from ufs:/dev/da1s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Thanks,
Mike.
More information about the freebsd-scsi
mailing list