SE7520BD2SCSI mainboard not suported hardware ?

[Edvardas Butrimas]

Hi,
Sorry for my english

I have problem with Intel® Server Board SE7520BD2SCSI.

http://www.intel.com/design/servers/boards/se7520bd2/index.htm

Two Ultra320/LVD channels via the LSI Logic 53C1030 SCSI controller and
connected via two internal 68-pin-wide connectors; maximum data transfer 320
MB/sec on each Ultra320/LVD controller, supporting RAID 0 and 1, and support
for modular ROMB (Intel RAID Controller SRCZCRX)

SCSI disks works terribly.
They copy 3mb/s.
Does the disks are in RAID or single they works terribly.
I try other SCSI controler on PCI, but the problem the same.
I try different OS, like freebsd i386 4.11, 5.3, amd64 5.3(it suports E7520
chipset), NetBSD 2.0, only windows 2003 works fine.
Intel mainboard CD have drivers for Windows, UnixWare, SUSE, Red Hat,
NetWare.
Do you have any suggestions? any ideas ?

Here is server
SE7520BD2SCSI	INTEL (BRANDON SCSI) SERVER BOARD OEM
BX80546KG3000EA	INTEL XEON 3.0GHZ 800FSB 1M BOX, ACTIVE
KVR333X72RC25/512	512MB 333MHZ DDR ECC REGISTERED CL2.5 DIMM
ST373207LW		SEAGATE CHEETAH 10K.7 73GB U320SCA 68-PIN
SC5275E		INTEL SERVER CHASSIS SC5275E

dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RC1 #0: Sun Oct 17 01:25:37 UTC 2004
    root at wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2992.51-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,M
CA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
E2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1073610752 (1023 MB)
avail memory = 1041047552 (992 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  6
 cpu3 (AP): APIC ID:  7
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pci0: <base peripheral> at device 1.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xc400-0xc4ff mem
0xfceb0000-0xfcebffff,0xfcec0000-0xfcecffff irq 26 at device 5.0 o
n pci2
mpt0: [GIANT-LOCKED]
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem
0xfcee0000-0xfceeffff,0xfcef0000-0xfcefffff irq 25 at device 5.1 o
n pci2
mpt1: [GIANT-LOCKED]
pci1: <base peripheral, interrupt controller> at device 0.1 (no driver
attached)
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pci1: <base peripheral, interrupt controller> at device 0.3 (no driver
attached)
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 5.0 on pci0
pcib5: could not get PCI interrupt routing table for \\_SB_.PCI0.EPB1 -
AE_NOT_FOUND
pci5: <ACPI PCI bus> on pcib5
pci5: <network, ethernet> at device 0.0 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> irq 16 at device 6.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xec00-0xec3f mem 0xfebe0000-0xfebfffff irq 16 at device 4.
0 on pci7
em0: Ethernet address: 00:0e:0c:4e:e3:f8
em0:  Speed:N/A  Duplex:N/A
pci7: <display, VGA> at device 12.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
orm0: <ISA Option ROMs> at iomem
0xcf800-0xd07ff,0xce800-0xcf7ff,0xca800-0xce7ff,0xc0000-0xca7ff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acd0: CDROM <LITE-ON CD-ROM LTN-529S/7S54> at ata0-slave UDMA33
Waiting 15 seconds for SCSI devices to settle
da0 at mpt1 bus 0 target 0 lun 0
da0: <LSILOGIC 1030          IS 1000> Fixed Direct Access SCSI-2 device
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing
Enabled
da0: 139756MB (286220288 512 byte sectors: 255H 63S/T 17816C)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/da0s1a