kern/75603: 5.3 kernel crash

[DJ Gregor]

The following reply was made to PR kern/75603; it has been noted by GNATS.

From: DJ Gregor <dgregor at interhack.com>
To: freebsd-gnats-submit at FreeBSD.org, oz at nixil.net
Cc:  
Subject: Re: kern/75603: 5.3 kernel crash
Date: Tue, 5 Apr 2005 20:18:41 -0400

 I've had the same problem with 5.3-RELEASE when I connected a Hitachi 
 IC35L073UCDY10 (this is Ultra320) to a Qlogic ISP1080 card.  Here is 
 what I get when booting in verbose mode (note: this was copied by hand, 
 so there might be errors):
 
 ...
 pass0 at isp0 bus 0 target 0 lun 0
 pass0: <IBM IC35L073UCDY10-0 S27F> Fixed Direct Access SCSI-3 device
 pass0: Serial Number E6W7735C
 
 Fatal trap 18: integer divide fault while in kernel mode
 instruction pointer     = 0x8:0xc044b9cf
 stack pointer           = 0x10:0xe5184644
 frame pointer           = 0x10:0xe5184654
 code segment            = base 0x0, limit 0xffff, type 0x1b
                          = DPL 0, pres 1, def32 1, gran 1
 processor eflags        = interrupt enabled, resume, IOPL = 0
 current process         = 33 (swi3: cambio)
 trap number             = 18
 panic: integer divide fault
 Uptime: 20s
 Cannot dump. No dump device define.
 Shutting down ACPI
 
 
 I'm installing FreeBSD to another drive, and I'll see what data I can 
 gather with a normal kernel.  I'll also see if I can try other drives 
 and another controller, although my time to test is a bit limited at 
 this point.  Please let me know if there is anything I ought to be 
 looking at or keeping my eye out for.
 
 
 	Thanks,
 	- djg