kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it

[Peter Pentchev]

The following reply was made to PR kern/71778; it has been noted by GNATS.

From: Peter Pentchev <roam at ringlet.net>
To: bug-followup at FreeBSD.org
Cc:  
Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
Date: Thu, 16 Sep 2004 13:25:53 +0300

 Make sure GNATS sees the originator's follow-up...
 
 ----- Forwarded message from Leroy van Logchem <leroy.vanlogchem at wldelft.nl> -----
 
 Date: Thu, 16 Sep 2004 10:02:20 +0200
 From: Leroy van Logchem <leroy.vanlogchem at wldelft.nl>
 To: Peter Pentchev <roam at ringlet.net>
 Subject: Re: kern/71778: 5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05,
  2 ch, 256 CCBs, Protocol I2O while 4.10-RELEASE can use it
 In-Reply-To: <20040916004037.GL1001 at straylight.m.ringlet.net>
 
 Peter Pentchev wrote:
 
 >On Wed, Sep 15, 2004 at 09:53:59PM +0000, Leroy R. van Logchem wrote:
 > 
 >
 >>>Number:         71778
 >>>Category:       kern
 >>>Synopsis:       5.3 BETA3 doesnt see Adaptec 2015S FW Rev. 3B05, 2 ch, 
 >>>256 CCBs, Protocol I2O while 4.10-RELEASE can use it
 >>>Originator:     Leroy R. van Logchem
 >>>     
 >>>
 >[snip]
 > 
 >
 >>Dmesg output captured using the live-cd:
 >>   
 >>
 >
 >Could you also provide the output of 'pnpinfo' and 'pciconf -lv' from
 >the live CD's shell prompt?
 >
 >G'luck,
 >Peter
 > 
 >
 Hi Peter,
 
 Thanks for looking at the PR since it would be greatly appricated when 
 this works.
 
 Output of 'pciconf -lv':
 ------------------------
 
 hostb0 at pci0:0:0:        class=0x060000 card=0x358015d9 chip=0x254c8086 
 rev=0x01 hdr=0x00
   class    = bridge
   subclass = HOST-PCI
 none0 at pci0:0:1: class=0xff0000 card=0x358015d9 chip=0x25418086 rev=0x01 
 hdr=0x00
 pcib1 at pci0:2:0: class=0x060400 card=0x00000000 chip=0x25438086 rev=0x01 
 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 uhci0 at pci0:29:0:        class=0x0c0300 card=0x358015d9 chip=0x24828086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 uhci1 at pci0:29:1:        class=0x0c0300 card=0x358015d9 chip=0x24848086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 uhci2 at pci0:29:2:        class=0x0c0300 card=0x358015d9 chip=0x24878086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = USB
 pcib4 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x244e8086 
 rev=0x42 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 isab0 at pci0:31:0:        class=0x060100 card=0x00000000 chip=0x24808086 
 rev=0x02 hdr=0x00
   class    = bridge
   subclass = PCI-ISA
 atapci0 at pci0:31:1:      class=0x01018a card=0x358015d9 chip=0x248b8086 
 rev=0x02 hdr=0x00
   class    = mass storage
   subclass = ATA
 none1 at pci0:31:3:        class=0x0c0500 card=0x358015d9 chip=0x24838086 
 rev=0x02 hdr=0x00
   class    = serial bus
   subclass = SMBus
 none2 at pci1:28:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
   class    = base peripheral
   subclass = interrupt controller
 pcib2 at pci1:29:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 none3 at pci1:30:0:        class=0x080020 card=0x358015d9 chip=0x14618086 
 rev=0x04 hdr=0x00
   class    = base peripheral
   subclass = interrupt controller
 pcib3 at pci1:31:0:        class=0x060400 card=0x00000050 chip=0x14608086 
 rev=0x04 hdr=0x01
   class    = bridge
   subclass = PCI-PCI
 em0 at pci2:3:0:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
   class    = network
   subclass = ethernet
 em1 at pci2:3:1:   class=0x020000 card=0x10118086 chip=0x10108086 rev=0x01 
 hdr=0x00
   class    = network
   subclass = ethernet
 asr0 at pci3:3:0:  class=0x010400 card=0xc0341044 chip=0xa5111044 rev=0x01 
 hdr=0x00
   class    = mass storage
   subclass = RAID
 none4 at pci4:1:0: class=0x030000 card=0x00081002 chip=0x47521002 rev=0x27 
 hdr=0x00
   class    = display
   subclass = VGA
 
 Output of 'pnpinfo':
 --------------------
 Checking for Plug-n-Play devices...
 No Plug-n-Play devices were found
 
 
 Anymore information needed?
 
 Best regards,
 Leroy
 
 
 
 ----- End forwarded message -----