Adaptec asr0 / ahc0 doesnt work on 5.3-BETA2 while 4.10-RELEASE can use it

Tue Sep 7 02:41:19 PDT 2004

Scott Long wrote:

> Leroy van Logchem wrote:
>
>> Dear FreeBSD-scsi people,
>>
>>
>> Short desc.:
>>
>> FreeBSD 5.3-BETA2 can't use Adaptec 7902 while FreeBSD 4.10-RELEASE can.
>
>
> The Adaptec 7902 is a SCSI chip.  If you are referring to the 2015S RAID
> card, then please refer to that.  The 7902 works fine.
>
>>
>> Long:
>>
>> Hardware being used is a Supermicro 6013P8 with a onboard Adaptec
>> AIC-7902 with an Adaptec 2015S raid module. The system has two internal
>> disks being mirrored raid1. An external raid cabinet, a Infortrend
>> Eonstor A08, is attached as two scsi-3 disk devices. The Adaptec bios
>> does show the devices everytime we reboot. Both 4.10 and 5.3-BETA2 do 
>> show the bios exported devices A: till D:
>
>
> What exactly is the problem?  I see no details about 5.3 here.
>
> Scott

The FreeBSD 5.3-BETA installer says no drives found.

Long problem description:
------------------------------

This occurs when using first install cd. On the system is still a 
working FBSD 4.10 install
which can use all drives connected to the Adaptec 2015S.

The bios output of the controller:
-------------------------------------

The Adaptec 2015S bios shows:

Controller: 0xF8300000 IRQ:5
Drive:   (0,0,0)   Adaptec RAID1      34GB
Proc:     (0,6,0)   SUPER GEM318
Drive:   (1,0,0)   IFT   ES A08U-G   697GB
Drive:   (1,0,1)   IFT   ES A08U-G   687GB

The 5.3-BETA2 bootloader reports:
Bios Drive C: is disk1
Bios Drive D: is disk2
Bios Drive E: is disk3

System hardware:
---------------------
Supermicro 6013P8 server
Adaptec AIC-7902 with Adaptec 2015S module.
Dual 36GB scsi onboard (being mirrored using the 2015S)
External Eonstor A08 raid cabinet.

Dmesg output captured using the live-cd:
----------------------------------------------

opyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA2 #1: Sat Aug 28 21:29:15 UTC 2004
  root at mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2799.69-MHz 686-class CPU)
Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS, 

HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory  = 1073217536 (1023 MB)
avail memory = 1036460032 (988 MB)
MPTable: <  Kings Canyon>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0: Assuming intbase of 0
ioapic1: Assuming intbase of 24
ioapic2: Assuming intbase of 48
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <unknown> at device 0.1 (no driver attached)
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <base peripheral, interrupt controller> at device 28.0 (no driver 
attached)
pcib2: <MPTable PCI-PCI bridge> at device 29.0 on pci1
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0x3000-0x303f mem 0xf8200000-0xf821ffff irq 54 at device 3.0 on p
ci2
em0: [GIANT-LOCKED]
em0: Ethernet address: 00:30:48:2a:53:be
em0:  Speed:N/A  Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port 
0x3040-0x307f mem 0xf8220000-0xf823ffff irq 55 at device 3.1 on p
ci2
em1: [GIANT-LOCKED]
em1: Ethernet address: 00:30:48:2a:53:bf
em1:  Speed:N/A  Duplex:N/A
pci1: <base peripheral, interrupt controller> at device 30.0 (no driver 
attached)
pcib3: <MPTable PCI-PCI bridge> at device 31.0 on pci1
pci3: <PCI bus> on pcib3
asr0: <Adaptec Caching SCSI RAID> mem 
0xfc000000-0xfdffffff,0xfb000000-0xfbffffff,0xf8300000-0xf83fffff irq 30 
at device 3.0 on pci3
asr0: [GIANT-LOCKED]
asr0: ADAPTEC 2015S FW Rev. 3B05, 2 channel, 256 CCBs, Protocol I2O
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 
0x2000-0x201f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 
0x2020-0x203f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 
0x2040-0x205f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib4: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <display, VGA> at device 1.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 
0x2060-0x206f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
cpu0 on motherboard
cpu1 on motherboard
orm0: <ISA Option ROMs> at iomem 
0xe0000-0xe3fff,0xc9000-0xcefff,0xc8000-0xc8fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model VersaPad, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ahc0: No resources alloated.
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
ahc0: No resources alloated.
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0700> can't assign resources (port)
Timecounters tick every 10.000 msec
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc09d4800
ATAPI_RESET time = 40us
acd0: CDROM <CD-224E/1.9A> at ata1-master UDMA33
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/md0