LSI 20320 MPT driver
J.D. Bronson
jbronson at wixb.com
Thu May 20 04:53:15 PDT 2004
I have 100% success with using my LSI 20320R card under freebsd 5.2.1
but have not setup any RAID on the card (yet)...so this email
is for pre-information prior to setting up a RAID-1 (mirror):
On a second machine that is running solaris, this is what I see:
May 19 19:40:10 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 19:40:10 shadow Rev. 7 LSI, Inc. 1030 found.
May 19 19:40:10 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 19:40:10 shadow mpt0 supports power management.
May 19 19:40:23 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 19:40:23 shadow mpt0 Firmware version v1.3.24.0
May 19 19:40:23 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 19:40:23 shadow mpt0: IOC Operational.
May 19 19:40:35 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 19:40:35 shadow Volume 0 is optimal
May 19 19:40:37 shadow unix: PCI-device: pci1000,1060 at 3, mpt0
May 19 19:40:37 shadow unix: mpt0 is /pci at 1,0/pci1000,1060 at 3
I can tell that the RAID is fine (optimal) and if it is not, I would see this:
May 19 16:46:51 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:46:51 shadow Rev. 7 LSI, Inc. 1030 found.
May 19 16:46:51 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:46:51 shadow mpt0 supports power management.
May 19 16:47:04 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:47:04 shadow mpt0 Firmware version v1.3.24.0
May 19 16:47:04 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:47:04 shadow mpt0: IOC Operational.
May 19 16:47:16 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:47:16 shadow Volume 0 is resyncing
May 19 16:47:16 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:47:16 shadow Volume 0 is degraded
May 19 16:47:18 shadow unix: PCI-device: pci1000,1060 at 3, mpt0
May 19 16:47:18 shadow unix: mpt0 is /pci at 1,0/pci1000,1060 at 3
May 19 16:47:19 shadow unix: /pci at 1,0/pci1000,1060 at 3 (mpt0):
May 19 16:47:19 shadow Volume 0 is |enabled||resyncing||degraded|
Would I expect to have similar on FreeBSD?
--
J.D. Bronson
Aurora Health Care // Information Services // Milwaukee, WI USA
Office: 414.978.8282 // Email: jd at aurora.org // Pager: 414.314.8282
More information about the freebsd-scsi
mailing list