Dell 1750, mpt0/multiple disks + boot failure

[Mechael Black]

Is there any fix or work around to using multiple SCSI disks in a 1750? I
ran across the thread below dated Dec/2003 - but there does not appear to
have been much followup.

http://lists.freebsd.org/pipermail/freebsd-scsi/2003-December/000871.html

Would appreciate any input.

Thanks,

-mblack



FreeBSD 4.9-RELEASE

mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xcc00-0xccff mem
0xfcd20000-0xfcd2ffff,0xfcd30000-0xfcd3
ffff irq 7 at device 5.0 on pci4
mpt1: <LSILogic 1030 Ultra4 Adapter> port 0xc800-0xc8ff mem
0xfcd00000-0xfcd0ffff,0xfcd10000-0xfcd1
ffff irq 5 at device 5.1 on pci4

pass1 at mpt0 bus 0 target 6 lun 0
pass1: <PE/PV 1x3 SCSI BP 1.1> Fixed Processor SCSI-2 device
pass1: 3.300MB/s transfers
da0 at mpt0 bus 0 target 0 lun 0
da0: <IBM IC35L036UCDY10-0 S27F> Fixed Direct Access SCSI-3 device
da0: 320.000MB/s transfers (160.000MHz, offset 127, 16bit), Tagged
Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)