Connecting logical device on 3210S

[Joshua Myles]

Hi,

I have an Adaptec 3210S with two arrays defined; one RAID-1 and one RAID-5.
I created the RAID-5 array using 'raidutil', and it built without a problem,
except that there's no device associated with it. 'camcontrol devlist'
gives:

   <ADAPTEC RAID-1 380E>              at scbus0 target 0 lun 0 (pass0,da0)
   <HITACHI DK32EJ-36NC 160B>         at scbus0 target 2 lun 0 (pass1,da1)
   <HITACHI DK32EJ-36NC 160B>         at scbus0 target 3 lun 0 (pass2,da2)
   <PE/PV 1x5 SCSI BP 1.1>            at scbus0 target 6 lun 0 (pass3)
   <ADAPTEC RAID-5 380E>              at scbus1 target 0 lun 0 (pass18)
   <DELL PV22XS E.11>                 at scbus1 target 6 lun 0 (pass9)

da0 is the RAID-1, da2 and da3 are spare disks not in any array, and the
RAID-5 (pass18) is the new array I'd like to label and use. I tried a
'camcontrol rescan all', but this picks up (and gives device names to) all
of the individual physical disks in the RAID-5, which should be "hidden" by
the controller. Am I missing something?

Josh