BDR messages for Adaptec card

[Anatoliy Dmytriyev]

On Tue, 9 Mar 2004 22:53:54 -0800 (PST)
fc scsi <scsi_fc_group at yahoo.com> wrote:

> Hi,
>  
> I enabled CAMDEBUG in the kernel and got the logs at the time the problem
> happens. I have trimmed down the logs considerably as it generated a huge
> file. If after looking at the logs someone can even explain me what the
> problem might be (without bothering for the solution) it would be a great
> help.
>  
> Thanks.
> 
> fc scsi <scsi_fc_group at yahoo.com> wrote: 
> 
> Hi,
> 
> I am getting the error messages mentioned below on my system using the
> following Adaptec card on FreeBSD 4.7:
> 
> ========================================================================
> 
> ahc0: <Adaptec 29160B Ultra160 SCSI adapter> port 0xde00-0xdeff mem
> 0xfe9df000-0


I had the same problem with <Adaptec 29160 Ultra160 SCSI adapter>. Somebody
said that problem is in broken hard drives but in my case I found problem in the
bad scsi terminator. So, try to check it and maybe it can help you.


Best regards,
Anatoliy Dmytriyev

-- 
Anatoliy Dmytriyev <tolid at plab.ku.dk>