adaptec 29160 as module (on amd64) ?

[Bjoern A. Zeeb]

On Mon, 19 Jul 2004, Scott Long wrote:

> Is there a reason why you suspect this?  The driver is designed to match
> Id's that are 'close enough', and a stock 29160 should have no trouble
> being matched.

should match exactly if I verified pciconf -l -v output with sources
correctly.

Hadn't thought of ID matching but general attach routine failure or
s.th. like that.


>  Please compile the driver into the kernel to rule
> this out.  As I've said before, kld modules are not 100% working or
> supported on amd64 yet.

verified that it gets detected when built into kernel:

--- cut ---
ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb000-0xb0ff mem 0xf3d00000-0xf3d00fff irq 19 at device 14.0 on pci0
ahc0: [GIANT-LOCKED]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
...
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 1 lun 0
sa0: <QUANTUM DLT8000 0119> Removable Sequential Access SCSI-2 device
sa0: 20.000MB/s transfers (10.000MHz, offset 15, 16bit)
--- cut ---

Will test the module in some weeks again on amd64.

Many Thanks.

-- 
Greetings

Bjoern A. Zeeb				bzeeb at Zabbadoz dot NeT