DLT Drive for FreeBSD 4.8 STABLE

Wilko Bulte wkb at freebie.xs4all.nl
Mon Jan 12 06:21:46 PST 2004 

On Mon, Jan 12, 2004 at 03:45:04PM +0200, James Ainslie wrote:


FWIW: I never had troubles with DLT2000, DLT4000, DLT7000 on
FreeBSD. I have yet to find someone who will give me a SDLT :-( :-)

Does not help you much I'm afraid..

Wilko

> Hello,
> 
> I didnt get any feedback from this list on my message posted on the
> 5th. Please note I am not asking for help with existing problems.
> 
> I really want some kind of recommendation as to what I should buy that
> members of this list know will work well with FreeBSD.
> 
> If you dont know the answer perhaps you could put me in contact with
> somebody off this list that may have it.
> 
> Thanks
> 
> James.
> 
>  
>  > Date: Mon, 5 Jan 2004 14:49:52 +0200
>  > From: James Ainslie <james at starjuice.net>
>  > To: freebsd-scsi at freebsd.org
>  > Subject: DLT Drive for FreeBSD 4.8 STABLE
>  > 
>  > Hello,
>  > 
>  > I need some recommendations for a DLT drive for use with 
>  > FreeBSD 4.9-STABLE. 
>  > 
>  > 	dmesg(8) output attched.
>  > 
>  > We are using a COMPAQ SuperDLT1 4B4B Removable Sequential Access
>  > SCSI-2 device, which is causing no end of problems. And we want to buy
>  > something that works well with FreeBSD.
>  > 
>  > I have trawled the archives and the handbook and these deal mostly with
>  > problems with specific drives rather than recommendations.
>  > 
>  > James.
>  > 
>  > 
>  > 
>  > ----< /var/run/dmesg.boot >-------------------------------------------------------------
>  > 
>  > Copyright (c) 1992-2003 The FreeBSD Project.
>  > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>  > 	The Regents of the University of California. All rights reserved.
>  > FreeBSD 4.9-STABLE #22: Fri Nov 28 10:19:08 EST 2003
>  >     root at mail2.starjuice.com:/a/obj/usr/src/sys/BACKUP
>  > Timecounter "i8254"  frequency 1193182 Hz
>  > Timecounter "TSC"  frequency 1715284164 Hz
>  > CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1715.28-MHz 686-class CPU)
>  >   Origin = "GenuineIntel"  Id = 0xf12  Stepping = 2
>  >   Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
>  > real memory  = 1073659904 (1048496K bytes)
>  > avail memory = 1041682432 (1017268K bytes)
>  > Preloaded elf kernel "kernel" at 0xc0355000.
>  > Warning: Pentium 4 CPU: PSE disabled
>  > netsmb_dev: loaded
>  > Pentium Pro MTRR support enabled
>  > md0: Malloc disk
>  > Using $PIR table, 12 entries at 0xc00f15e0
>  > npx0: <math processor> on motherboard
>  > npx0: INT 16 interface
>  > pcib0: <Intel 82845 Host to PCI bridge> on motherboard
>  > pci0: <PCI bus> on pcib0
>  > pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
>  > pci1: <PCI bus> on pcib1
>  > pci1: <ATI model 5446 graphics accelerator> at 0.0 irq 11
>  > pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
>  > pci2: <PCI bus> on pcib2
>  > ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb800-0xb8ff mem 0xf2800000-0xf2800fff irq 5 at device 11.0 on pci2
>  > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
>  > fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb400-0xb43f mem 0xf1800000-0xf181ffff,0xf2000000-0xf2000fff irq 12 at device 12.0 on pci2
>  > fxp0: Ethernet address 00:02:b3:a8:18:35
>  > inphy0: <i82555 10/100 media interface> on miibus0
>  > inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>  > isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
>  > isa0: <ISA bus> on isab0
>  > atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
>  > ata0: at 0x1f0 irq 14 on atapci0
>  > ata1: at 0x170 irq 15 on atapci0
>  > pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at 31.2 irq 10
>  > pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> at 31.4 irq 5
>  > orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd4000-0xd57ff on isa0
>  > pmtimer0 on isa0
>  > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
>  > fdc0: FIFO enabled, 8 bytes threshold
>  > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>  > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>  > kbd0 at atkbd0
>  > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>  > sc0: <System console> at flags 0x100 on isa0
>  > sc0: VGA <16 virtual consoles, flags=0x300>
>  > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>  > sio0: type 16550A
>  > sio1 at port 0x2f8-0x2ff irq 3 on isa0
>  > sio1: type 16550A
>  > ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-master UDMA100
>  > acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata1-master PIO4
>  > Waiting 15 seconds for SCSI devices to settle
>  > sa0 at ahc0 bus 0 target 6 lun 0
>  > sa0: <COMPAQ SuperDLT1 4B4B> Removable Sequential Access SCSI-2 device 
>  > sa0: 40.000MB/s transfers (20.000MHz, offset 62, 16bit)
>  > da0 at ahc0 bus 0 target 1 lun 0
>  > da0: <SEAGATE ST318438LW 0003> Fixed Direct Access SCSI-3 device 
>  > da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
>  > da0: 19001MB (38914049 512 byte sectors: 255H 63S/T 2422C)
>  > Mounting root from ufs:/dev/da0s1a
>  > 
>  > 
>  
>  ----- End forwarded message -----
>  
>  -- 
>  James Ainslie
>  
>  ::Clue:: 
> 
> ----- End forwarded message -----
> 
> -- 
> James Ainslie
> 
> ::Clue:: 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
---end of quoted text---

-- 
|   / o / /_  _   		
|/|/ / / /(  (_)  Bulte		wilko at FreeBSD.org

More information about the freebsd-scsi mailing list