DLT Drive for FreeBSD 4.8 STABLE

[James Ainslie]

Hello,

I didnt get any feedback from this list on my message posted on the
5th. Please note I am not asking for help with existing problems.

I really want some kind of recommendation as to what I should buy that
members of this list know will work well with FreeBSD.

If you dont know the answer perhaps you could put me in contact with
somebody off this list that may have it.

Thanks

James.

 
 > Date: Mon, 5 Jan 2004 14:49:52 +0200
 > From: James Ainslie <james at starjuice.net>
 > To: freebsd-scsi at freebsd.org
 > Subject: DLT Drive for FreeBSD 4.8 STABLE
 > 
 > Hello,
 > 
 > I need some recommendations for a DLT drive for use with 
 > FreeBSD 4.9-STABLE. 
 > 
 > 	dmesg(8) output attched.
 > 
 > We are using a COMPAQ SuperDLT1 4B4B Removable Sequential Access
 > SCSI-2 device, which is causing no end of problems. And we want to buy
 > something that works well with FreeBSD.
 > 
 > I have trawled the archives and the handbook and these deal mostly with
 > problems with specific drives rather than recommendations.
 > 
 > James.
 > 
 > 
 > 
 > ----< /var/run/dmesg.boot >-------------------------------------------------------------
 > 
 > Copyright (c) 1992-2003 The FreeBSD Project.
 > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
 > 	The Regents of the University of California. All rights reserved.
 > FreeBSD 4.9-STABLE #22: Fri Nov 28 10:19:08 EST 2003
 >     root at mail2.starjuice.com:/a/obj/usr/src/sys/BACKUP
 > Timecounter "i8254"  frequency 1193182 Hz
 > Timecounter "TSC"  frequency 1715284164 Hz
 > CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1715.28-MHz 686-class CPU)
 >   Origin = "GenuineIntel"  Id = 0xf12  Stepping = 2
 >   Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
 > real memory  = 1073659904 (1048496K bytes)
 > avail memory = 1041682432 (1017268K bytes)
 > Preloaded elf kernel "kernel" at 0xc0355000.
 > Warning: Pentium 4 CPU: PSE disabled
 > netsmb_dev: loaded
 > Pentium Pro MTRR support enabled
 > md0: Malloc disk
 > Using $PIR table, 12 entries at 0xc00f15e0
 > npx0: <math processor> on motherboard
 > npx0: INT 16 interface
 > pcib0: <Intel 82845 Host to PCI bridge> on motherboard
 > pci0: <PCI bus> on pcib0
 > pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
 > pci1: <PCI bus> on pcib1
 > pci1: <ATI model 5446 graphics accelerator> at 0.0 irq 11
 > pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
 > pci2: <PCI bus> on pcib2
 > ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xb800-0xb8ff mem 0xf2800000-0xf2800fff irq 5 at device 11.0 on pci2
 > aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
 > fxp0: <Intel 82550 Pro/100 Ethernet> port 0xb400-0xb43f mem 0xf1800000-0xf181ffff,0xf2000000-0xf2000fff irq 12 at device 12.0 on pci2
 > fxp0: Ethernet address 00:02:b3:a8:18:35
 > inphy0: <i82555 10/100 media interface> on miibus0
 > inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
 > isa0: <ISA bus> on isab0
 > atapci0: <Intel ICH2 ATA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
 > ata0: at 0x1f0 irq 14 on atapci0
 > ata1: at 0x170 irq 15 on atapci0
 > pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> at 31.2 irq 10
 > pci0: <Intel 82801BA/BAM (ICH2) USB controller USB-B> at 31.4 irq 5
 > orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xd4000-0xd57ff on isa0
 > pmtimer0 on isa0
 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
 > fdc0: FIFO enabled, 8 bytes threshold
 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
 > kbd0 at atkbd0
 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 > sc0: <System console> at flags 0x100 on isa0
 > sc0: VGA <16 virtual consoles, flags=0x300>
 > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 > sio0: type 16550A
 > sio1 at port 0x2f8-0x2ff irq 3 on isa0
 > sio1: type 16550A
 > ad0: 117800MB <IC35L120AVVA07-0> [239340/16/63] at ata0-master UDMA100
 > acd0: CDROM <HL-DT-ST CD-ROM GCR-8520B> at ata1-master PIO4
 > Waiting 15 seconds for SCSI devices to settle
 > sa0 at ahc0 bus 0 target 6 lun 0
 > sa0: <COMPAQ SuperDLT1 4B4B> Removable Sequential Access SCSI-2 device 
 > sa0: 40.000MB/s transfers (20.000MHz, offset 62, 16bit)
 > da0 at ahc0 bus 0 target 1 lun 0
 > da0: <SEAGATE ST318438LW 0003> Fixed Direct Access SCSI-3 device 
 > da0: 40.000MB/s transfers (20.000MHz, offset 63, 16bit), Tagged Queueing Enabled
 > da0: 19001MB (38914049 512 byte sectors: 255H 63S/T 2422C)
 > Mounting root from ufs:/dev/da0s1a
 > 
 > 
 
 ----- End forwarded message -----
 
 -- 
 James Ainslie
 
 ::Clue:: 

----- End forwarded message -----

-- 
James Ainslie

::Clue::