problems with Adaptec SCSI adapter and IBM harddrives

[Anatoliy Dmytriyev]

Hello, everybody!

I need to install a scsi system on my 4.9 freebsd box and used the scsi card
"Adaptec 29160 Ultra160 SCSI adapter" and external cabinet with the IBM drive:
<IBM IC35L146UWDY10-0 S23C>. After stratup FreeBSD detected Adaptec and hard
drive, I did fdisk, label and newfs without any problems, but when I tried copy
data on this scsi disk I got error messages:

(da0:ahc0:0:6:0): SCB 0x3 - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc0: Dumping Card State in Data-out phase, at SEQADDR 0x89
Card was paused
ACCUM = 0x0, SINDEX = 0x2, DINDEX = 0x52, ARG_2 = 0xff
HCNT = 0x0 SCBPTR = 0x1
SCSIPHASE[0x0] SCSISIGI[0x4] ERROR[0x0] SCSIBUSL[0x34] 
LASTPHASE[0x0] SCSISEQ[0x12] SBLKCTL[0x6] SCSIRATE[0x95] 
SEQCTL[0x10] SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x0] 
SSTAT2[0x40] SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac] 
SXFRCTL0[0x80] DFCNTRL[0x2c] DFSTATUS[0x89] 
STACK: 0x0 0x16b 0x63 0x89
SCB count = 20
Kernel NEXTQSCB = 12
Card NEXTQSCB = 14
QINFIFO entries: 14 15 0 16 17 18 19 1 2 4 5 6 7 8 9 13 
Waiting Queue entries: 
Disconnected Queue entries: 
QOUTFIFO entries: 
Sequencer Free SCB List: 0 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
22 23 24 25 26 27 28 29 30 31 Sequencer SCB Info: 
  0 SCB_CONTROL[0xe0] SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0xff] 
  1 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] SCB_TAG[0x3] 
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
 31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff] 
Pending list: 
 13 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  9 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  8 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  7 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  6 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  5 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  4 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  2 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  1 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 19 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 18 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 17 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 16 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  0 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 15 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
 14 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
  3 SCB_CONTROL[0x60] SCB_SCSIID[0x67] SCB_LUN[0x0] 
Kernel Free SCB list: 11 10 

>>>>>>>>>>>>>>>>>
sg[0] - Addr 0x6571000 : Length 4096
sg[1] - Addr 0x6972000 : Length 4096
sg[2] - Addr 0x6933000 : Length 4096
sg[3] - Addr 0x65b4000 : Length 4096
sg[4] - Addr 0x6775000 : Length 4096
sg[5] - Addr 0x6916000 : Length 4096
sg[6] - Addr 0x6b37000 : Length 4096
sg[7] - Addr 0x64f8000 : Length 4096
sg[8] - Addr 0x6df9000 : Length 4096
sg[9] - Addr 0x6d3a000 : Length 4096
sg[10] - Addr 0x6fdb000 : Length 4096
sg[11] - Addr 0x6d9c000 : Length 4096
sg[12] - Addr 0x6f1d000 : Length 4096
sg[13] - Addr 0x6d5e000 : Length 4096
sg[14] - Addr 0x6f7f000 : Length 4096
sg[15] - Addr 0x7080000 : Length 4096
(da0:ahc0:0:6:0): BDR message in message buffer
(da0:ahc0:0:6:0): SCB 0x3 - timed out



And many many times. I tried with other harddrive (the same model) and with card
"Adaptec 2940 Ultra SCSI adapter" - the same result.

Do you have any ideas: where is problems? I have not many experience with scsi
devices and will appreciate for any help.

Best regards,
Anatoliy Dmytriyev

-- 
Anatoliy Dmytriyev <tolid at plab.ku.dk>