IBM x345 + EXP400

[eric]

On Thu, 2004-08-12 at 09:23:48 +0200, J.Molinger proclaimed...

> Keep in mind that the ips driver can give you some trouble in the 5.2.1.
> branch. The ips.h was wrong, so that the serveraid was not recoqnized. Use
> the latest 5.2 current and then updated to 5.2.1 release, will keeping the
> ips drivers from the current source.
> Also important is that the ips driver doesn't support the scsi pass-through
> bus. So if you use a tape drive (or LTO / DLTO etc) use the onboard
> controller (LSI). The ServerRAID 6M is a hell of a card, very fast in RAID
> 5!!. Uses the latest Xscale processor from intel and has standard 256mb
> battery-cache onboard.

How does one go about making these floppies? Sorry if this is
off-topic from -scsi, but can someone hit me in the head with a link
on how to make a -CURRENT floppy?

Thanks

- Eric