IBM x345 + EXP400

[J.Molinger]

I have approx. 8 IBM x345 machines running FreeBSD (5.2.1 release). They
have all a ServeRaid 6M controller because there is also a LTO drive
connected. Works fine no problem. What kind of RAID solution are you having.
We also have the EXP400 (very nice indeed!!). 
I should go for the 5.x Freebsd. 5.3 will be released very shortly.
The ServeRAID cd works. If else you can configure RAID1 through the bios of
the LSI controller.

See also
http://www.freebsdforums.org/forums/search.php?s=&action=showresults&searchi
d=346895&sortby=lastpost&sortorder=descending

Greetz

Jeroen Molinger



-----Oorspronkelijk bericht-----
Van: owner-freebsd-scsi at freebsd.org [mailto:owner-freebsd-scsi at freebsd.org]
Namens eric
Verzonden: donderdag 12 augustus 2004 6:20
Aan: freebsd-scsi at freebsd.org
Onderwerp: IBM x345 + EXP400

I've been reading some older posts to figure out how to get either
4.10 or 5.2.1 running on an IBM x345. Here's what is in this
particular machine...

x345, 6 internal 10k 146GB disks.
An internal U320 LVD SCSI Adapter
An EXP400 External Array with 14x146 10k drives

What I found was this...

<http://unix.derkeiler.com/Mailing-Lists/FreeBSD/isp/2003-05/0065.html>

But I'm curious to know...

a) does this work for arrays setup using the ServerGuide
configuration CD delivered with the hardware?
b) does all this actually work? :)
c) what kind of error reporting is there, if it works, to the
Operating System? 

Hopefully we won't have to go the "luser unix route"

Thanks.

_______________________________________________
freebsd-scsi at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"