Problem with ciss(4) in production system
Anthony Stanton
anthony.stanton at es.easynet.net
Thu Sep 25 00:34:09 PDT 2003
On Thu, Sep 25, 2003 at 12:01:29AM -0700, Paul Saab wrote:
> Anthony Stanton (anthony.stanton at es.easynet.net) wrote:
> > On Wed, Sep 24, 2003 at 05:14:00PM -0700, Paul Saab wrote:
> > > dmesg from a boot verbose please.
>
> I see da0 in the attached dmesg
Sorry, I was being lame - misunderstood what you meant and sent the
dmesg from the pre-problem boot.
Here goes:
--
Anthony Stanton +34 91 789 46 00
Systems Manager, Easynet España S.A.U. http://www.es.easynet.net/
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE-p8 #1: Wed Sep 24 13:37:08 CEST 2003
root at brooklyn.mail.es.easynet.net:/usr/obj/usr/src/sys/BROOKLYN
Calibrating clock(s) ... TSC clock: 863857503 Hz, i8254 clock: 1193082 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel Pentium III (863.94-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 1207943168 (1179632K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009dfff, 643072 bytes (157 pages)
0x00352000 - 0x47ff3fff, 1204428800 bytes (294050 pages)
avail memory = 1170554880 (1143120K bytes)
Changing APIC ID for IO APIC #0 from 0 to 8 on chip
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 8, version: 0x00220011, at 0xfec00000
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x94
Other BIOS signatures found:
ACPI: 000f4f90
Preloaded elf kernel "kernel" at 0xc0328000.
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1000, dev=0x0010, revid=0x02
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base 00002000, size 8
map[14]: type 1, range 32, base c5000000, size 24
map[18]: type 1, range 32, base c4000000, size 24
found-> vendor=0x1002, dev=0x4756, revid=0x7a
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base c2000000, size 24
map[14]: type 1, range 32, base 00002400, size 8
map[18]: type 1, range 32, base c3fff000, size 12
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
class=08-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
map[10]: type 1, range 32, base 00001800, size 8
map[14]: type 1, range 32, base c3ffef00, size 8
found-> vendor=0x0e11, dev=0xb060, revid=0x02
class=01-04-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[10]: type 1, range 32, base c3f80000, size 18
map[14]: type 1, range 32, base c3e00000, size 20
map[20]: type 1, range 32, base 00002800, size 8
found-> vendor=0x1166, dev=0x0200, revid=0x51
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0211, revid=0x00
class=01-01-8a, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 00002c00, size 4
pci0: <PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc4000000-0xc4ffffff,0xc5000000-0xc5ffffff irq 5 at device 1.0 on pci0
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 17359MB (35553120 sectors), blocksize=512
Creating DISK idad0
pci0: <ATI Mach64-GV graphics accelerator> (vendor=0x1002, dev=0x4756) at 3.0
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 4.0
ciss0: <Compaq Smart Array 5300> port 0x2800-0x28ff mem 0xc3e00000-0xc3efffff,0xc3f80000-0xc3fbffff irq 3 at device 5.0 on pci0
ciss0: using 256 of 1024 available commands
ciss0: 1 logical drive configured
ciss0: firmware 2.92
ciss0: 2 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0xe<simple,performant,MEMQ>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 0
ciss0: max outstanding commands 1024
ciss0: bus types 0x2<ultra3>
ciss0: server name ''
ciss0: heartbeat 0x2000004a
ciss0: 1 logical drive
ciss0: logical drive 1: RAID 5, 381952MB online
isab0: <ServerWorks IB6566 PCI to ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 ATA33 controller> port 0x2c00-0x2c0f at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2c00
ata0: mask=03 ostat0=20 ostat2=30
ata0-master: ATAPI 20 20
ata0-slave: ATAPI 30 30
ata0: mask=03 stat0=20 stat1=30
ata0-master: ATA 25 25
ata0-slave: ATA 25 25
ata0: devices=00
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2c08
ata1: mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 14 eb
ata1: mask=03 stat0=00 stat1=01
ata1: devices=0c
ata1: at 0x170 irq 15 on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=7
map[10]: type 1, range 32, base c6fff000, size 12
map[14]: type 1, range 32, base 00003000, size 6
map[18]: type 1, range 32, base c6e00000, size 20
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base c6dff000, size 12
map[14]: type 1, range 32, base 00003040, size 6
map[18]: type 1, range 32, base c6c00000, size 20
pci3: <PCI bus> on pcib3
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x3000-0x303f mem 0xc6e00000-0xc6efffff,0xc6fff000-0xc6ffffff irq 7 at device 4.0 on pci3
fxp0: using memory space register mapping
fxp0: Ethernet address 00:02:a5:8a:83:c0
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0x3040-0x307f mem 0xc6c00000-0xc6cfffff,0xc6dff000-0xc6dfffff irq 10 at device 5.0 on pci3
fxp1: using memory space register mapping
fxp1: Ethernet address 00:02:a5:8a:83:bf
fxp1: PCI IDs: 8086 1229 0e11 b134 0008
fxp1: Dynamic Standby mode is disabled
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0685 (System Board)> on eisa0 slot 0
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xcffff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x8041 0x8051 0x8041 0x8041
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x8041 0x8041 0x8041 0x8041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
isa_probe_children: probing PnP devices
SMP: enabled INTs: 1, 3, 4, 5, 6, 7, 10, 12, 14, 15, apic_imen: 0x00ff2b05
BIOS Geometries:
0:03fffe20 0..1023=1024 cylinders, 0..254=255 heads, 1..32=32 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0 intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
ata1-slave: ATAPI identify retries exceeded
ata1-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata1-master: success setting PIO4 on generic chip
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
acd0: <CD-224E/9.0C> CDROM drive at ata1 as master
acd0: read 4134KB/s (34515KB/s), 512KB buffer, PIO4
acd0: Reads: CD-R, CD-DA stream
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0
(probe0:ciss0:0:0:0): ILLEGAL REQUEST asc:68,0
(probe0:ciss0:0:0:0): Logical unit not configured
Mounting root from ufs:/dev/idad0s1a
idad0s1: type 0xa5, start 73440, end = 35553119, size 35479680 : OK
idad0s3: type 0x12, start 32, end = 73439, size 73408 : OK
start_init: trying /sbin/init
More information about the freebsd-scsi
mailing list