FYI, Seagate and SCB timed out

[Marc G. Fournier]

'k, 4 out of 6 drives upgraded:

neptune# camcontrol devlist
<SEAGATE ST373307LC 0006>          at scbus1 target 0 lun 0 (pass0,da0)
<SEAGATE ST373307LC 0006>          at scbus1 target 1 lun 0 (pass1,da1)
<SEAGATE ST373307LC 0007>          at scbus1 target 2 lun 0 (pass2,da2)
<SEAGATE ST373307LC 0007>          at scbus1 target 3 lun 0 (pass3,da3)
<SEAGATE ST373307LC 0007>          at scbus1 target 4 lun 0 (pass4,da4)
<SEAGATE ST373307LC 0007>          at scbus1 target 5 lun 0 (pass5,da5)
<ESG-SHV SCA HSBP M16 0.05>        at scbus1 target 6 lun 0 (pass6)

da2 is the one that I've been noticing it on more frequently, so we'll see
what happens over the next few days ... if all is well, will scheduale
some time in single user mode for the other two *cross fingers*



On Tue, 16 Sep 2003, Don Bowman wrote:

>
> FYI, there is a new firmware available from seagate
> for both the 10K(007) and 15K(006) U320 drives.
> If you are experiencing issues such as
> 'SCB timed out' messages appearing on your console,
> [perhaps in conjunction with the ahd (AIC7902) adaptec
> driver] you may wish to contact seagate and request this
> firmware.
>
> --don
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
>