IBM ServeRaid-3 on FreeBSD 5.1 (release & current)

[Ian Morrison]

hiya,

i posted this on current@ last week, but haven't heard anything back.
i'm reposting it here in the hope that someone might be able to shine
some light on the problem..

i've just got hold of an IBM Netfinity 4000R system (8653-45Y) which
uses an IBM ServeRaid-3L to control two 9 gig disks.  Drives are set up
as a standard mirror, and online.  Booting from 5.1-RELEASE and the
latest snapshot i could find both result in a kernel panic on boot.

i've included the dmesg for both kernels below, and would be grateful
if anyone could offer any advice.

many thanks,


ian



Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT-20030908-JPSNAP #0: Mon Sep  8 03:26:52 GMT 2003
    root at ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b41000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0b41200.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (745.00-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1031286784 (983 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0707670
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at
devic=
e 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device
7.1 o=
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at
devi=
ce 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem
0xfea00000-0xfe=
afffff,0xfebff000-0xfebfffff irq 10 at device 17.0 on pci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x4080
fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29
fxp0: Ethernet address 00:06:29:de:b9:ac
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3080-0x30bf mem
0xfe900000-0xfe=
9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0 on pci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x4080
fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29
fxp1: Ethernet address 00:06:29:de:b9:ab
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib2
ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem
0xfe000000-0xfe0fffff =
irq 9 at device 15.0 on pci2
ips0: reinitializing adapter, this could take several minutes.
ips0: logical drives: 222
ipsd0: <Logical Drive> on ips0
GEOM: create disk ipsd0 dp=3D0xc6588b90
ipsd0: Logical Drive  (1824184MB)
ipsd1: <Logical Drive> on ips0
GEOM: create disk ipsd1 dp=3D0xc6588a90
ipsd1: Logical Drive  (1824184MB)
ipsd2: <Logical Drive> on ips0
GEOM: create disk ipsd2 dp=3D0xc6588990
ipsd2: Logical Drive  (1824184MB)
ipsd3: <Logical Drive> on ips0
GEOM: create disk ipsd3 dp=3D0xc6588890
ipsd3: Logical Drive  (1824184MB)
ipsd4: <Logical Drive> on ips0
GEOM: create disk ipsd4 dp=3D0xc6588790
Memory modified after free 0xc65aa080(124)
panic: Most recently used by none

Debugger("panic")
Stopped at      Debugger+0x54:  xchgl   %ebx,in_Debugger.0
db> reset
=00=00=00=00=80=80=00=80=80=80=00=00=00=00=F8=F8=80=00=FE=F8=80=80=00=98=00=
=E6=00=F8DS=00=00=00Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun  5 02:55:42 GMT 2003
    root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ac1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ac1200.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 744995420 Hz
CPU: Intel Pentium III (745.00-MHz 686-class CPU)
  Origin =3D "GenuineIntel"  Id =3D 0x681  Stepping =3D 1
  Features=3D0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory  =3D 1073741824 (1024 MB)
avail memory =3D 1031827456 (984 MB)
Pentium Pro MTRR support enabled
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06877a4
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Intel 82443GX host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443GX host to PCI bridge> mem 0xf0000000-0xf3ffffff at
devic=
e 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xffa0-0xffaf at device
7.1 o=
n pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x3000-0x301f at
devi=
ce 7.2 on pci0
uhci0: Could not allocate irq
device_probe_and_attach: uhci0 attach returned 6
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
0x3040-0x307f=
 mem 0xfea00000-0xfeafffff,0xfebff000-0xfebfffff irq 10 at device 17.0
on p=
ci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x4080
fxp0: EEPROM checksum @ 0x3f: 0xd29 -> 0xd29
fxp0: Ethernet address 00:06:29:de:b9:ac
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port
0x3080-0x30bf=
 mem 0xfe900000-0xfe9fffff,0xfebfe000-0xfebfefff irq 11 at device 18.0
on p=
ci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x4080
fxp1: EEPROM checksum @ 0x3f: 0xe29 -> 0xe29
fxp1: Ethernet address 00:06:29:de:b9:ab
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib2: <PCI-PCI bridge> at device 20.0 on pci0
pci2: <PCI bus> on pcib2
ips0: <IBM ServeRAID Adapter> port 0x2000-0x20ff mem
0xfe000000-0xfe0fffff =
irq 9 at device 15.0 on pci2
ips0: reinitializing adapter, this could take several minutes.
ips0: logical drives: 0


Fatal trap 12: page fault while in kernel mode
fault virtual address   =3D 0xffddc399
fault code      =3D supervisor read, page not present
instruction pointer =3D 0x8:0xc031ce94
stack pointer           =3D 0x10:0xc0ae3c14
frame pointer           =3D 0x10:0xc0ae3c24
code segment        =3D base 0x0, limit 0xfffff, type 0x1b
            =3D DPL 0, pres 1, def32 1, gran 1
processor eflags    =3D interrupt enabled, resume, IOPL =3D 0
current process     =3D 0 (swapper)
trap number     =3D 12
panic: page fault
Uptime: 1s
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
-- 
:: darq.net /#/             :: such swoopy interwords | mnemonica