how to boot off scsi not ide

[Randy Bush]

my mobo won't let me tell it to prefer the scsi to the ide, but i
want to prefer the scsi.  can i config that?

randy

---

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #3: Mon Jun 23 18:04:49 GMT 2003
    root at feen.baz:/usr/obj/usr/src/sys/FEEN
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (1699.82-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf13  Stepping = 3
  Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,>
real memory  = 536805376 (524224K bytes)
avail memory = 518692864 (506536K bytes)
Preloaded elf kernel "kernel" at 0xc0396000.
Pentium Pro MTRR support enabled
Using $PIR table, 13 entries at 0xc00fde90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82845 Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem 0xe3000000-0xe33fffff at device 0.0 0
pcib1: <Intel 82845 PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9000-0x90ff mem 0xe22000002
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x9400-0x94ff mem 0xe22020002
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x9800-0x983f mem2
fxp0: Ethernet address 00:30:48:51:c8:5e
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x9c00-0x9c3f mem2
fxp1: Ethernet address 00:30:48:51:c8:5f
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <ATI Mach64-GR graphics accelerator> at 8.0 irq 12
isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 ATA100 controller> port 0xf000-0xf00f at device 31.1 on pc0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xb000-0xb01f irq 10
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xb800-0xb81f irq 70
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
IPsec: Initialized Security Association Processing.
acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST336607LC 0005> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabld
da0: 35003MB (71687372 512 byte sectors: 255H 63S/T 4462C)
dumpon: sysctl: kern.dumpdev: Device not configured
swapon: adding /dev/da0s1b as swap device