RAID status on PowerEdge 2600 with Perc 4/DI

[Moore, Eric Dean]

MegaRAID - http://people.freebsd.org/~emoore/MegaRAID_SCSI/UserInterfaceGUI/
MegaMON - http://people.freebsd.org/~emoore/MegaRAID_SCSI/Daemon/

Eric Moore

> -----Original Message-----
> From: benkovsky at nextra.cz [mailto:benkovsky at nextra.cz]
> Sent: Friday, May 09, 2003 10:29 AM
> To: freebsd-scsi at freebsd.org
> Subject: RAID status on PowerEdge 2600 with Perc 4/DI
> 
> 
> Hi, folks,
> 
> I apologize if I ask a faq, but I did not find anything about
> the subject.
> 
> I have a Dell PE 2600 with LSILogic PERC 4/Di RAID controller. 
> FreeBSD 4.8 detects the status of the RAID during the boot fine:
> 
> amr0: <LSILogic MegaRAID> mem 0xfebf0000-0xfebfffff irq 11 at 
> device 8.0 on pci8
> amr0: <LSILogic PERC 4/Di> Firmware 2.20, BIOS 1.03, 128MB RAM
> ....
> amrd0: <LSILogic MegaRAID logical drive> on amr0
> amrd0: 349390MB (715550720 sectors) RAID 5 (degraded)
> ....
> pass0 at amr0 bus 0 target 6 lun 0
> pass0: <PE/PV 1x6 SCSI BP 0.29> Fixed Processor SCSI-2 device 
> 
> I would like to get the information about degraded status / 
> disk removal
> in /var/log/messages without a need to reboot the machine, 
> but I could not find
> how - ses does not work or I am doing something stupid.
> 
> Is there currently a way to do so?
> 
> Thank you for any help,
> Jarda Benkovsky
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to 
> "freebsd-scsi-unsubscribe at freebsd.org"
>