kern/53566: IBM Eserver (245 || 345) + ServeRaid 5i ips driver panic

[Scott Long]

Jack Patton wrote:
> Okay, I hooked up a serial console and the CURRENT-20030627-JPSNAP. This is 
> as far as the boot gets, along with a trace. Has there been any progress 
> backporting this driver to 4.8 yet?
> 

There isn't much sense in backporting this until the memory corruption
problem is fixed.  I'll see what I can do.

Scott

> 
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
> FreeBSD 5.1-CURRENT-20030627-JPSNAP #0: Fri Jun 27 00:23:43 GMT 2003
>     root at ushi.jp.freebsd.org:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b5d000.
> Preloaded mfs_root "/boot/mfsroot" at 0xc0b5d278.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b5d2bc.
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 2793897976 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.90-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>   
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C
> MOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Hyperthreading: 2 logical CPUs
> real memory  = 526385152 (502 MB)
> avail memory = 499253248 (476 MB)
> Pentium Pro MTRR support enabled
> md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc06d9528
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <IBM    SERONYXP> on motherboard
> pcibios: BIOS version 2.10
> acpi0: power button is handled as a fixed feature programming model.
> Timecounter "ACPI-fast"  frequency 3579545 Hz
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 9 INTA is routed to irq 10
> pcib0: slot 15 INTA is routed to irq 11
> pci0: <display, VGA> at device 9.0 (no driver attached)
> atapci0: <ServerWorks CSB5 UDMA100 controller> port 0x700-0x70f,0x374-
> 0x377,0x17
> 0-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: simplex device, DMA on primary only
> ata1: at 0x170 irq 15 on atapci0
> ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11 at 
> devic
> e 15.2 on pci0
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 4 ports with 4 removable, self powered
> isab0: <PCI-ISA bridge> at device 15.3 on pci0
> isa0: <ISA bus> on isab0
> pcib1: <ACPI Host-PCI bridge> on acpi0
> pci2: <ACPI PCI bus> on pcib1
> pcib1: slot 8 INTA is routed to irq 3
> bge0: <Broadcom BCM5703X Gigabit Ethernet, ASIC rev. 0x1002> mem 0xfbff0000-
> 0xfb
> ffffff irq 3 at device 8.0 on pci2
> bge0: Ethernet address: 00:09:6b:a5:18:05
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX
> -FDX, auto
> pcib2: <ACPI Host-PCI bridge> on acpi0
> pci5: <ACPI PCI bus> on pcib2
> pcib2: slot 3 INTA is routed to irq 9
> ips0: <IBM ServeRAID Adapter> mem 0xf4000000-0xf7ffffff irq 9 at device 3.0 
> on p
> ci5
> ips0: logical drives: 222
> ipsd0: <Logical Drive> on ips0
> ipsd0: Logical Drive  (1824184MB)
> ipsd1: <Logical Drive> on ips0
> ipsd1: Logical Drive  (1824184MB)
> ipsd2: <Logical Drive> on ips0
> ipsd2: Logical Drive  (1824184MB)
> ipsd3: <Logical Drive> on ips0
> ipsd3: Logical Drive  (1824184MB)
> ipsd4: <Logical Drive> on ips0
> ipsd4: Logical Drive  (1824184MB)
> ipsd5: <Logical Drive> on ips0
> ipsd5: Logical Drive  (1824184MB)
> ipsd6: <Logical Drive> on ips0
> ipsd6: Logical Drive  (1824184MB)
> ipsd7: <Logical Drive> on ips0
> ipsd7: Logical Drive  (1824184MB)
> pcib3: <ACPI Host-PCI bridge> on acpi0
> pci7: <ACPI PCI bus> on pcib3
> pcib4: <ACPI Host-PCI bridge> on acpi0
> Memory modified after free 0xc4300c00(252)
> panic: Most recently used by devbuf
> 
> Debugger("panic")
> Stopped at      Debugger+0x54:  xchgl   %ebx,in_Debugger.0
> db> tr
> Debugger(c05025bf,c05c5240,c0519512,c0b7fa7c,100) at Debugger+0x54
> panic(c0519512,c0500e61,fc,c0c3ab74,c0c3ab60) at panic+0xcc
> mtrash_ctor(c4300c00,100,0,549,c4300c00) at mtrash_ctor+0x5d
> uma_zalloc_arg(c0c3ab60,0,1,c0b7fb44,e) at uma_zalloc_arg+0x194
> malloc(98,c0b4d1a0,1,c0b7fb1c,c0b352c8) at malloc+0xd4
> AcpiOsAllocate(98,c4308140,4,4,c4315cc0) at AcpiOsAllocate+0x21
> AcpiUtInitializeBuffer(c431c250,98,c0b4876c,0,c0b7fb44) at 
> AcpiUtInitializeBuffe
> r+0x38
> AcpiRsCreatePciRoutingTable(c4315cc0,c431c250,8,c0b7fb6c,c4315cc0) at 
> AcpiRsCrea
> tePciRoutingTable+0x3e
> AcpiRsGetPrtMethodData(c43045a0,c431c250,c433e380,c431c250,c0b7fbbc) at 
> AcpiRsGe
> tPrtMethodData+0x41
> AcpiGetIrqRoutingTable(c43045a0,c431c250,100,c0b7fbac,9) at 
> AcpiGetIrqRoutingTab
> le+0x35
> acpi_pcib_attach(c433e380,c431c250,9,c0b7fbe8,c42dc068) at 
> acpi_pcib_attach+0x6e
> 
> acpi_pcib_acpi_attach(c433e380,c18c4500,c433e380,c433e380,c18c4500) at 
> acpi_pcib
> _acpi_attach+0x21d
> DEVICE_ATTACH(c433e380,c433e380,6,c18ab020,0) at DEVICE_ATTACH+0x48
> device_probe_and_attach(c433e380,4,c0b7fc78,c0b390e4,c18c4500) at 
> device_probe_a
> nd_attach+0x7d
> bus_generic_attach(c18c4500,c18ab020,64,c0b39100,c18c4500) at 
> bus_generic_attach
> +0x28
> acpi_probe_children(c18c4500,c0b3a8a0,c4318980,0,1a4) at 
> acpi_probe_children+0x9
> 4
> acpi_attach(c18c4500,c42dc098,c05288f8,c18c4500,c18c3580) at acpi_attach+0x6e3
> DEVICE_ATTACH(c18c4500,c18c4500,c18c3580,c05288f0,1) at DEVICE_ATTACH+0x48
> device_probe_and_attach(c18c4500,c18c3580,c0b7fd18,c049713c,c18c3580) at 
> device_
> probe_and_attach+0x7d
> bus_generic_attach(c18c3580,c42ad098,c0b7fd34,c0327798,c18c3580) at 
> bus_generic_
> attach+0x28
> nexus_attach(c18c3580,c42ad098,c05288f8,c18c3580,c18c4080) at 
> nexus_attach+0x1c
> DEVICE_ATTACH(c18c3580,c18c3580,0,c18b18d0,1) at DEVICE_ATTACH+0x48
> device_probe_and_attach(c18c3580,c18b18d0,c0b7fd80,c04887b5,c18c4080) at 
> device_
> probe_and_attach+0x7d
> root_bus_configure(c18c4080,c051c640,0,c0b7fd98,c02e9a25) at 
> root_bus_configure+
> 0x28
> configure(0,b7c000,b7cc00,b7c000,0) at configure+0x35
> mi_startup() at mi_startup+0xb5
> begin() at begin+0x2c
> db>