ql2200

[Tomas Hodan]

I loaded the ispfw.ko

-----Original Message-----
From: 'Wilko Bulte' [mailto:wkb at freebie.xs4all.nl] 
Sent: Wednesday, July 09, 2003 6:17 PM
To: Tomas Hodan
Cc: freebsd-scsi at freebsd.org
Subject: Re: ql2200


On Wed, Jul 09, 2003 at 02:32:31PM +0100, Tomas Hodan wrote:

And did you load ispfw.ko or not?

> I tried another ibm intellistation z pro (a current model) and ql2322 
> (dual 2GBit fibre) and another disk array (ibm) with same results.
> 
> tomas
> 
> -----Original Message-----
> From: Wilko Bulte [mailto:wkb at freebie.xs4all.nl]
> Sent: Tuesday, July 08, 2003 8:28 PM
> To: Tomas Hodan
> Cc: freebsd-scsi at freebsd.org
> Subject: Re: ql2200
> 
> 
> On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote:
> 
> Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko 
> (the firmware for the cards the isp driver supports).
> 
> Wilko
> 
> > 
> > I have problem to get running qlogic 2200 in current. I have tried
> > diffenet qlogic boards (but all was ql2200), different qlogic bios, 
> > disk arrays, different freebsd version, different pci slots.
> > 
> > with current version (cvs and build) from
> > Jul  7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul  4
> > 14:03:50 GMT 2003
> > 
> > I'm getting this error :
> > 
> > Jul  7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL 
> > Adapter>
> 
> > port 0x9800-0x98ff mem 0xf2003000-0xf2 003fff irq 11 at device 8.0 
> > on
> > pci3 Jul  7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2)

> > Timeout Jul  7 10:11:49 pica kernel: device_probe_and_attach: isp0 
> > attach returned 6
> > 
> > sometimes the kernel stays in this state forever, sometime after
> > sometime it finish booting. I had twice succesfull boot with the 
> > qlogic board and I was able to use the disks connected to the board.

> > after next reboot it stops to work.
> > 
> > anyone any ides?
> > 
> > thanks
> > tomas
> > 
> > _______________________________________________
> > freebsd-scsi at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> > To unsubscribe, send any mail to 
> > "freebsd-scsi-unsubscribe at freebsd.org"
> ---end of quoted text---
> 
> --
> |   / o / /_  _   		wilko at FreeBSD.org
> |/|/ / / /(  (_)  Bulte				
---end of quoted text---

-- 
|   / o / /_  _   		wilko at FreeBSD.org
|/|/ / / /(  (_)  Bulte