ql2200

[Wilko Bulte]

On Tue, Jul 08, 2003 at 04:37:27PM +0100, Tomas Hodan wrote:

Matt (who wrote the isp driver) will ask you if you loaded ispfw.ko
(the firmware for the cards the isp driver supports).

Wilko

> 
> I have problem to get running qlogic 2200 in current. I have tried
> diffenet qlogic boards (but all was ql2200), different qlogic bios, disk
> arrays, different freebsd version, different pci slots.
> 
> with current version (cvs and build) from
> Jul  7 10:11:48 pica kernel: FreeBSD 5.1-CURRENT #0: Fri Jul  4 14:03:50
> GMT 2003
> 
> I'm getting this error :
> 
> Jul  7 10:11:49 pica kernel: isp0: <Qlogic ISP 2200 PCI FC-AL Adapter>
> port 0x9800-0x98ff mem 0xf2003000-0xf2
> 003fff irq 11 at device 8.0 on pci3
> Jul  7 10:11:49 pica kernel: isp0: Polled Mailbox Command (0x2) Timeout
> Jul  7 10:11:49 pica kernel: device_probe_and_attach: isp0 attach
> returned 6
> 
> sometimes the kernel stays in this state forever, sometime after
> sometime it finish booting.
> I had twice succesfull boot with the qlogic board and I was able to use
> the disks connected to the board. after next reboot it stops to work.
> 
> anyone any ides?
> 
> thanks
> tomas
> 
> _______________________________________________
> freebsd-scsi at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-scsi
> To unsubscribe, send any mail to "freebsd-scsi-unsubscribe at freebsd.org"
---end of quoted text---

-- 
|   / o / /_  _   		wilko at FreeBSD.org
|/|/ / / /(  (_)  Bulte