Probe0 sym0 Error 5 unretryable error

[Polytropon]

On Tue, 5 May 2020 15:10:17 +0200, Christoph Kukulies wrote:
> After powering down devices that were attached to the SCSI-bus (sym0),
> an SCSI CDROM got detached.
> 
> I did a camcontrol rescann all and the CDROM got attached again.
> Nonethless an error was screened:
> 
> cd1 at sym0 bus 0 scbus7 target 4 lun 0
> cd1: <TEAC CD-R55S 1.0R> Removable CD-ROM SCSI-2 device
> cd1: Serial Number 8X32458B
> cd1: 10.000MB/s transfers (10.000MHz, offset 8)
> cd1: 656MB (335925 2048 byte sectors)
> (probe0:sym0:0:4:7): INQUIRY. CDB: 12 e0 00 00 24 00 
> (probe0:sym0:0:4:7): CAM status: Auto-Sense Retrieval Failed
> (probe0:sym0:0:4:7): Error 5, Unretryable error
> 
> Just for the record and if an SCSI/sym0 expert ca make head or tail of it?

Maybe you can use

	# camcontrol reset all

to make sure the controller can mark this bus as "not in use
with any device"?



-- 
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...