1.drm-kmod turns console into bright with gray text, 2. portsnap auto fails.
Mrityunjoy Ghosh
mgofbbk at gmail.com
Mon Nov 4 12:12:57 UTC 2019
My AMD Radeon hd 6670 gpu is not performing well.
1. While installing drm-kmod and adding to /etc/rc.conf
kld_list=radeonkms.ko as directed the console turns whitish or bright with
gray text.
2. Deinstalling drm-kmod and installing drm-legacy-kmod initially ran well.
After that installing xorg and xfce was successful. But once after xfce
session the system hangs and does not reboot. It shows a black screen and
after some time it was shutting diwn. It was showing a nessage of firmware
load error. Omitting the gpu and connecting to motherboard directly give a
way to access the display. Drm-legacy-kmod was deinstalled and reinstalled.
Connection to amd gpu was made . Problem persisted. Drm-legacy-kmod, xorg,
xfce was deinstalled. Now it came to near initial setup.
3.drm-kmod is installed again to send the feedback and request help.
4. Now portsnap fetch update is not working. Shows a file with a big
alphanumaric name ending .gz not found -- snapshot corrupt.
My question is where are the problems and what are the solutions?
Please reply.
-------------- next part --------------
nexus0
cryptosoft0
efirtc0
apic0
I/O memory addresses:
0xfec00000-0xfec0001f
ram0
I/O memory addresses:
0x0-0x9dfff
0x100000-0xde45cfff
0xde4fe000-0xde581fff
0xdee06000-0xdee06fff
0xdee4a000-0xdf5b4fff
0xdf7e3000-0xdf7fffff
0x100000000-0x21effffff
acpi0
Interrupt request lines:
0x9
I/O ports:
0x10-0x1f
0x22-0x3f
0x44-0x5f
0x61
0x62-0x63
0x65-0x6f
0x70
0x72-0x7f
0x80
0x84-0x86
0x88
0x8c-0x8e
0x90-0x9f
0xa2-0xbf
0xe0-0xef
0x200-0x20f
0x400-0x453
0x454-0x457
0x458-0x47f
0x4d0-0x4d1
0x500-0x57f
0x680-0x69f
0xa00-0xa0f
0xa20-0xa2f
0xa30-0xa3f
0xffff
I/O memory addresses:
0xf0100000-0xf0100fff
0xf8000000-0xfbffffff
0xfed10000-0xfed17fff
0xfed18000-0xfed18fff
0xfed19000-0xfed19fff
0xfed1c000-0xfed1ffff
0xfed20000-0xfed3ffff
0xfed40000-0xfed44fff
0xfed45000-0xfed8ffff
0xfed90000-0xfed93fff
0xfee00000-0xfeefffff
0xff000000-0xffffffff
cpu0 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU0
acpi_perf0
est0
p4tcc0
cpufreq0
cpu1 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU1
acpi_perf1
est1
p4tcc1
cpufreq1
cpu2 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU2
acpi_perf2
est2
p4tcc2
cpufreq2
cpu3 pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU3
acpi_perf3
est3
p4tcc3
cpufreq3
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU4
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU5
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU6
unknown pnpinfo _HID=none _UID=0 at handle=\_PR_.CPU7
pcib0 pnpinfo _HID=PNP0A08 _UID=0 at handle=\_SB_.PCI0
I/O ports:
0xcf8-0xcff
pci0
PCI domain 0 bus numbers:
0
hostb0 pnpinfo vendor=0x8086 device=0x0100 subvendor=0x1458 subdevice=0x5000 class=0x060000 at slot=0 function=0 dbsf=pci0:0:0:0
pcib1 pnpinfo vendor=0x8086 device=0x0101 subvendor=0x1458 subdevice=0x5000 class=0x060400 at slot=1 function=0 dbsf=pci0:0:1:0 handle=\_SB_.PCI0.PEG0
I/O ports:
0xe000-0xefff
I/O memory addresses:
0xe0000000-0xefffffff
0xf7e00000-0xf7efffff
PCI domain 0 bus numbers:
1
pci1
pcib1 bus numbers:
1
vgapci0 pnpinfo vendor=0x1002 device=0x6758 subvendor=0x1682 subdevice=0x318b class=0x030000 at slot=0 function=0 dbsf=pci0:1:0:0
Interrupt request lines:
0x10
pcib1 I/O port window:
0xe000-0xe0ff
pcib1 memory window:
0xf7e20000-0xf7e3ffff
pcib1 prefetch window:
0xe0000000-0xefffffff
drm0
drm1
drm_dp_aux_dev0
i2c8
drm2
drm3
drmn0
drm128
unknown
i2c0
i2c1
i2c2
i2c3
i2c4
i2c5
i2c6
i2c7
graphics0
fbd0
hdac0 pnpinfo vendor=0x1002 device=0xaa90 subvendor=0x1682 subdevice=0xaa90 class=0x040300 at slot=0 function=1 dbsf=pci0:1:0:1
Interrupt request lines:
0x108
pcib1 memory window:
0xf7e40000-0xf7e43fff
hdacc0 pnpinfo vendor=0x1002 device=0xaa01 revision=0x02 stepping=0x00 at cad=0
hdaa0 pnpinfo type=0x01 subsystem=0x00aa0100 at nid=1
pcm0 at nid=3
unknown pnpinfo vendor=0x8086 device=0x1c3a subvendor=0x1458 subdevice=0x1c3a class=0x078000 at slot=22 function=0 dbsf=pci0:0:22:0
I/O memory addresses:
0xf7f09000-0xf7f0900f
ehci0 pnpinfo vendor=0x8086 device=0x1c2d subvendor=0x1458 subdevice=0x5006 class=0x0c0320 at slot=26 function=0 dbsf=pci0:0:26:0 handle=\_SB_.PCI0.EHC2
Interrupt request lines:
0x10
I/O memory addresses:
0xf7f07000-0xf7f073ff
usbus0
uhub0
uhub2 pnpinfo vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 devproto=0x01 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 at bus=0 hubaddr=1 port=1 devaddr=2 interface=0 ugen=ugen0.2
hdac1 pnpinfo vendor=0x8086 device=0x1c20 subvendor=0x1458 subdevice=0xa002 class=0x040300 at slot=27 function=0 dbsf=pci0:0:27:0 handle=\_SB_.PCI0.HDEF
Interrupt request lines:
0x109
I/O memory addresses:
0xf7f00000-0xf7f03fff
hdacc1 pnpinfo vendor=0x10ec device=0x0887 revision=0x03 stepping=0x02 at cad=2
hdaa1 pnpinfo type=0x01 subsystem=0x1458a002 at nid=1
pcm1 at nid=20,24,26
pcm2 at nid=27,25
pcib2 pnpinfo vendor=0x8086 device=0x1c10 subvendor=0x1458 subdevice=0x5001 class=0x060400 at slot=28 function=0 dbsf=pci0:0:28:0 handle=\_SB_.PCI0.RP01
PCI domain 0 bus numbers:
2
pci2
pcib2 bus numbers:
2
pcib3 pnpinfo vendor=0x8086 device=0x1c18 subvendor=0x1458 subdevice=0x5001 class=0x060400 at slot=28 function=4 dbsf=pci0:0:28:4 handle=\_SB_.PCI0.RP05
I/O ports:
0xd000-0xdfff
I/O memory addresses:
0xf0000000-0xf00fffff
PCI domain 0 bus numbers:
3
pci3
pcib3 bus numbers:
3
re0 pnpinfo vendor=0x10ec device=0x8168 subvendor=0x1458 subdevice=0xe000 class=0x020000 at slot=0 function=0 dbsf=pci0:3:0:0 handle=\_SB_.PCI0.RP05.PXSX
Interrupt request lines:
0x10a
pcib3 I/O port window:
0xd000-0xd0ff
pcib3 prefetch window:
0xf0000000-0xf0003fff
0xf0004000-0xf0004fff
miibus0
rgephy0 pnpinfo oui=0xe04c model=0x11 rev=0x5 at phyno=1
ehci1 pnpinfo vendor=0x8086 device=0x1c26 subvendor=0x1458 subdevice=0x5006 class=0x0c0320 at slot=29 function=0 dbsf=pci0:0:29:0 handle=\_SB_.PCI0.EHC1
Interrupt request lines:
0x17
I/O memory addresses:
0xf7f06000-0xf7f063ff
usbus1
uhub1
uhub3 pnpinfo vendor=0x8087 product=0x0024 devclass=0x09 devsubclass=0x00 devproto=0x01 sernum="" release=0x0000 mode=host intclass=0x09 intsubclass=0x00 intprotocol=0x00 at bus=1 hubaddr=1 port=1 devaddr=2 interface=0 ugen=ugen1.2
ukbd0 pnpinfo vendor=0x045e product=0x0750 devclass=0x00 devsubclass=0x00 devproto=0x00 sernum="" release=0x0110 mode=host intclass=0x03 intsubclass=0x01 intprotocol=0x01 at bus=1 hubaddr=2 port=6 devaddr=4 interface=0 ugen=ugen1.4
ums0 pnpinfo vendor=0x045e product=0x00cb devclass=0x00 devsubclass=0x00 devproto=0x00 sernum="" release=0x0104 mode=host intclass=0x03 intsubclass=0x01 intprotocol=0x02 at bus=1 hubaddr=2 port=5 devaddr=3 interface=0 ugen=ugen1.3
uhid0 pnpinfo vendor=0x045e product=0x0750 devclass=0x00 devsubclass=0x00 devproto=0x00 sernum="" release=0x0110 mode=host intclass=0x03 intsubclass=0x00 intprotocol=0x00 at bus=1 hubaddr=2 port=6 devaddr=4 interface=1 ugen=ugen1.4
isab0 pnpinfo vendor=0x8086 device=0x1c5c subvendor=0x1458 subdevice=0x5001 class=0x060100 at slot=31 function=0 dbsf=pci0:0:31:0 handle=\_SB_.PCI0.LPCB
isa0
sc0
vga0
orm0 pnpinfo pnpid=ORM0000
I/O memory addresses:
0xc0000-0xcffff
atkbdc0
I/O ports:
0x60
0x64
atkbd0
Interrupt request lines:
0x1
psm0
fdc0
ppc0
uart0
uart1
atapci0 pnpinfo vendor=0x8086 device=0x1c00 subvendor=0x1458 subdevice=0xb005 class=0x01018f at slot=31 function=2 dbsf=pci0:0:31:2 handle=\_SB_.PCI0.SAT0
Interrupt request lines:
0x13
I/O ports:
0xf080-0xf08f
0xf090-0xf09f
0xf0a0-0xf0a3
0xf0b0-0xf0b7
0xf0c0-0xf0c3
0xf0d0-0xf0d7
ata2 at channel=0
ata3 at channel=1
unknown pnpinfo vendor=0x8086 device=0x1c22 subvendor=0x1458 subdevice=0x5001 class=0x0c0500 at slot=31 function=3 dbsf=pci0:0:31:3 handle=\_SB_.PCI0.SBUS
I/O ports:
0xf000-0xf01f
I/O memory addresses:
0xf7f05000-0xf7f050ff
atapci1 pnpinfo vendor=0x8086 device=0x1c08 subvendor=0x1458 subdevice=0xb002 class=0x010185 at slot=31 function=5 dbsf=pci0:0:31:5 handle=\_SB_.PCI0.SAT1
Interrupt request lines:
0x13
I/O ports:
0xf020-0xf02f
0xf030-0xf03f
0xf040-0xf043
0xf050-0xf057
0xf060-0xf063
0xf070-0xf077
ata4 at channel=0
ata5 at channel=1
acpi_sysresource0 pnpinfo _HID=PNP0C01 _UID=1 at handle=\_SB_.PCI0.TPMX
atdma0 pnpinfo _HID=PNP0200 _UID=0 at handle=\_SB_.PCI0.LPCB.DMAC
DMA request lines:
4
I/O ports:
0xc0-0xdf
unknown pnpinfo _HID=INT0800 _UID=0 at handle=\_SB_.PCI0.LPCB.FWHD
hpet0 pnpinfo _HID=PNP0103 _UID=0 at handle=\_SB_.PCI0.LPCB.HPET
Interrupt request lines:
0x100
0x101
0x102
0x103
0x104
0x105
0x106
0x107
I/O memory addresses:
0xfed00000-0xfed003ff
unknown pnpinfo _HID=PNP0000 _UID=0 at handle=\_SB_.PCI0.LPCB.IPIC
I/O ports:
0x20-0x21
0xa0-0xa1
acpi_sysresource1 pnpinfo _HID=PNP0C02 _UID=2 at handle=\_SB_.PCI0.LPCB.LDRC
atrtc0 pnpinfo _HID=PNP0B00 _UID=0 at handle=\_SB_.PCI0.LPCB.RTC_
Interrupt request lines:
0x8
attimer0 pnpinfo _HID=PNP0100 _UID=0 at handle=\_SB_.PCI0.LPCB.TIMR
Interrupt request lines:
0x0
I/O ports:
0x40-0x43
acpi_sysresource2 pnpinfo _HID=INT3F0D _UID=0 at handle=\_SB_.PCI0.LPCB.CWDT
acpi_sysresource3 pnpinfo _HID=PNP0C02 _UID=273 at handle=\_SB_.PCI0.LPCB.SIO1
unknown pnpinfo _HID=PNP0303 _UID=0 at handle=\_SB_.PCI0.LPCB.PS2K (disabled)
unknown pnpinfo _HID=PNP0F03 _UID=0 at handle=\_SB_.PCI0.LPCB.PS2M (disabled)
acpi_sysresource4 pnpinfo _HID=PNP0C02 _UID=16 at handle=\_SB_.PCI0.LPCB.RMSC
fpupnp0 pnpinfo _HID=PNP0C04 _UID=0 at handle=\_SB_.PCI0.LPCB.COPR
I/O ports:
0xf0-0xff
unknown pnpinfo _HID=PNP0C09 _UID=1 at handle=\_SB_.PCI0.LPCB.H_EC (disabled)
unknown pnpinfo _HID=PNP0C0A _UID=0 at handle=\_SB_.PCI0.LPCB.H_EC.BAT0 (disabled)
unknown pnpinfo _HID=PNP0C0A _UID=1 at handle=\_SB_.PCI0.LPCB.H_EC.BAT1 (disabled)
unknown pnpinfo _HID=PNP0C0A _UID=2 at handle=\_SB_.PCI0.LPCB.H_EC.BAT2 (disabled)
acpi_sysresource5 pnpinfo _HID=PNP0C02 _UID=1 at handle=\_SB_.PCI0.PDRC
unknown pnpinfo _HID=ABCDEFGH _UID=2 at handle=\_SB_.PCI0.DOCK (disabled)
pci_link0 pnpinfo _HID=PNP0C0F _UID=1 at handle=\_SB_.LNKA
pci_link1 pnpinfo _HID=PNP0C0F _UID=2 at handle=\_SB_.LNKB
pci_link2 pnpinfo _HID=PNP0C0F _UID=3 at handle=\_SB_.LNKC
pci_link3 pnpinfo _HID=PNP0C0F _UID=4 at handle=\_SB_.LNKD
pci_link4 pnpinfo _HID=PNP0C0F _UID=5 at handle=\_SB_.LNKE
pci_link5 pnpinfo _HID=PNP0C0F _UID=6 at handle=\_SB_.LNKF
pci_link6 pnpinfo _HID=PNP0C0F _UID=7 at handle=\_SB_.LNKG
pci_link7 pnpinfo _HID=PNP0C0F _UID=8 at handle=\_SB_.LNKH
acpi_button0 pnpinfo _HID=PNP0C0C _UID=170 at handle=\_SB_.PWRB
unknown pnpinfo _HID=PNP0C01 _UID=2 at handle=\_SB_.MEM2 (disabled)
unknown pnpinfo _HID=PNP0C0D _UID=0 at handle=\_SB_.LID0 (disabled)
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN00
unknown pnpinfo _HID=PNP0C0B _UID=0 at handle=\_TZ_.FAN0
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN01
unknown pnpinfo _HID=PNP0C0B _UID=1 at handle=\_TZ_.FAN1
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN02
unknown pnpinfo _HID=PNP0C0B _UID=2 at handle=\_TZ_.FAN2
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN03
unknown pnpinfo _HID=PNP0C0B _UID=3 at handle=\_TZ_.FAN3
unknown pnpinfo _HID=none _UID=0 at handle=\_TZ_.FN04
unknown pnpinfo _HID=PNP0C0B _UID=4 at handle=\_TZ_.FAN4
acpi_tz0 pnpinfo _HID=none _UID=0 at handle=\_TZ_.TZ00
acpi_tz1 pnpinfo _HID=none _UID=0 at handle=\_TZ_.TZ01
acpi_timer0 pnpinfo unknown at unknown
ACPI I/O ports:
0x408-0x40b
-------------- next part --------------
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p10 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1280x1024
CPU: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz (2893.49-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8251326464 (7869 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 3 1 2
Timecounter "TSC-low" frequency 1446743238 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV930 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7f07000-0xf7f073ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xf7f00000-0xf7f03fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 40:8d:5c:26:9f:a9
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7f06000-0xf7f063ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf09f,0xf080-0xf08f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf030-0xf03f,0xf020-0xf02f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
ugen0.1: <Intel EHCI root HUB> at usbus0
ugen1.1: <Intel EHCI root HUB> at usbus1
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST1000VX005-2EZ102 CV11> ATA8-ACS SATA 3.x device
ada0: Serial Number Z9C5XX2Y
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p3 [rw]...
cd0 at ata4 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NS95 RN01> Removable CD-ROM SCSI device
cd0: Serial Number KZWD1M94344
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1682:0x318B 0x00).
[drm:radeon_device_init] Unable to find PCI I/O BAR
[drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: TURKS
drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4156400 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading TURKS Microcode
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
ugen1.3: <Unknown > at usbus1 (disconnected)
uhub_reattach_port: could not allocate new device
drmn0: successfully loaded firmware image with name: radeon/TURKS_pfp.bin
ugen1.3: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus1
drmn0: successfully loaded firmware image with name: radeon/TURKS_me.bin
drmn0: successfully loaded firmware image with name: radeon/BTC_rlc.bin
ugen1.4: <Microsoft Wired Keyboard 600> at usbus1
ukbd0 on uhub3
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus1
kbd2 at ukbd0
drmn0: successfully loaded firmware image with name: radeon/TURKS_mc.bin
drmn0: successfully loaded firmware image with name: radeon/TURKS_smc.bin
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
drmn0: successfully loaded firmware image with name: radeon/SUMO_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff8000435ac00
drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff8000435ac0c
drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800e0072118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-I-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-I-1
[drm] - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD1
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE0363000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xe0363000 vbase=0xfffff800e0363000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm:btc_dpm_set_power_state] rv770_restrict_performance_levels_before_switch failed
[drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub3
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub3
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus1
-------------- next part --------------
hw.model: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz
-------------- next part --------------
hostb0 at pci0:0:0:0: class=0x060000 card=0x50001458 chip=0x01008086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '2nd Generation Core Processor Family DRAM Controller'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
PCI errors = Received Master-Abort
pcib1 at pci0:0:1:0: class=0x060400 card=0x50001458 chip=0x01018086 rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port'
class = bridge
subclass = PCI-PCI
cap 0d[88] = PCI Bridge card=0x50001458
cap 01[80] = powerspec 3 supports D0 D3 current D0
cap 05[90] = MSI supports 1 message
cap 10[a0] = PCI-Express 2 root port max data 128(128)
link x16(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
slot 1 power limit 75000 mW
ecap 0002[100] = VC 1 max VC0
ecap 0005[140] = Root Complex Link Declaration 1
none0 at pci0:0:22:0: class=0x078000 card=0x1c3a1458 chip=0x1c3a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family MEI Controller'
class = simple comms
bar [10] = type Memory, range 64, base 0xf7f09000, size 16, enabled
cap 01[50] = powerspec 3 supports D0 D3 current D0
cap 05[8c] = MSI supports 1 message, 64 bit
ehci0 at pci0:0:26:0: class=0x0c0320 card=0x50061458 chip=0x1c2d8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xf7f07000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
hdac1 at pci0:0:27:0: class=0x040300 card=0xa0021458 chip=0x1c208086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family High Definition Audio Controller'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf7f00000, size 16384, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 05[60] = MSI supports 1 message, 64 bit enabled with 1 message
cap 10[70] = PCI-Express 1 root endpoint max data 128(128) FLR NS
ecap 0002[100] = VC 1 max VC1
ecap 0005[130] = Root Complex Link Declaration 1
pcib2 at pci0:0:28:0: class=0x060400 card=0x50011458 chip=0x1c108086 rev=0xb5 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 1'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128)
link x0(x1) speed 0.0(5.0)
slot 0 power limit 100 mW
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x50011458
cap 01[a0] = powerspec 2 supports D0 D3 current D0
pcib3 at pci0:0:28:4: class=0x060400 card=0x50011458 chip=0x1c188086 rev=0xb5 hdr=0x01
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family PCI Express Root Port 5'
class = bridge
subclass = PCI-PCI
cap 10[40] = PCI-Express 2 root port max data 128(128)
link x1(x1) speed 2.5(5.0)
slot 4 power limit 100 mW
cap 05[80] = MSI supports 1 message
cap 0d[90] = PCI Bridge card=0x50011458
cap 01[a0] = powerspec 2 supports D0 D3 current D0
ehci1 at pci0:0:29:0: class=0x0c0320 card=0x50061458 chip=0x1c268086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family USB Enhanced Host Controller'
class = serial bus
subclass = USB
bar [10] = type Memory, range 32, base 0xf7f06000, size 1024, enabled
cap 01[50] = powerspec 2 supports D0 D3 current D0
cap 0a[58] = EHCI Debug Port at offset 0xa0 in map 0x14
cap 13[98] = PCI Advanced Features: FLR TP
isab0 at pci0:0:31:0: class=0x060100 card=0x50011458 chip=0x1c5c8086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'H61 Express Chipset LPC Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: AMT, 4 PCI-e x1 slots
atapci0 at pci0:0:31:2: class=0x01018f card=0xb0051458 chip=0x1c008086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 0-3)'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xf0d0, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xf0c0, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xf0b0, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf0a0, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf090, size 16, enabled
bar [24] = type I/O Port, range 32, base 0xf080, size 16, enabled
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 13[b0] = PCI Advanced Features: FLR TP
none1 at pci0:0:31:3: class=0x0c0500 card=0x50011458 chip=0x1c228086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family SMBus Controller'
class = serial bus
subclass = SMBus
bar [10] = type Memory, range 64, base 0xf7f05000, size 256, enabled
bar [20] = type I/O Port, range 32, base 0xf000, size 32, enabled
atapci1 at pci0:0:31:5: class=0x010185 card=0xb0021458 chip=0x1c088086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = '6 Series/C200 Series Chipset Family Desktop SATA Controller (IDE mode, ports 4-5)'
class = mass storage
subclass = ATA
bar [10] = type I/O Port, range 32, base 0xf070, size 8, enabled
bar [14] = type I/O Port, range 32, base 0xf060, size 4, enabled
bar [18] = type I/O Port, range 32, base 0xf050, size 8, enabled
bar [1c] = type I/O Port, range 32, base 0xf040, size 4, enabled
bar [20] = type I/O Port, range 32, base 0xf030, size 16, enabled
bar [24] = type I/O Port, range 32, base 0xf020, size 16, enabled
cap 01[70] = powerspec 3 supports D0 D3 current D0
cap 13[b0] = PCI Advanced Features: FLR TP
vgapci0 at pci0:1:0:0: class=0x030000 card=0x318b1682 chip=0x67581002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Turks XT [Radeon HD 6670/7670]'
class = display
subclass = VGA
bar [10] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
bar [18] = type Memory, range 64, base 0xf7e20000, size 131072, enabled
bar [20] = type I/O Port, range 32, base 0xe000, size 256, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) NS
link x16(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected
PCI-e errors = Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
Non-fatal = Unsupported Request
Corrected = Advisory Non-Fatal Error
hdac0 at pci0:1:0:1: class=0x040300 card=0xaa901682 chip=0xaa901002 rev=0x00 hdr=0x00
vendor = 'Advanced Micro Devices, Inc. [AMD/ATI]'
device = 'Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]'
class = multimedia
subclass = HDA
bar [10] = type Memory, range 64, base 0xf7e40000, size 16384, enabled
cap 01[50] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 10[58] = PCI-Express 2 legacy endpoint max data 128(256) NS
link x16(x16) speed 2.5(5.0) ASPM disabled(L0s/L1)
cap 05[a0] = MSI supports 1 message, 64 bit enabled with 1 message
ecap 000b[100] = Vendor 1 ID 1
ecap 0001[150] = AER 1 0 fatal 1 non-fatal 1 corrected
PCI-e errors = Correctable Error Detected
Non-Fatal Error Detected
Unsupported Request Detected
Non-fatal = Unsupported Request
Corrected = Advisory Non-Fatal Error
re0 at pci0:3:0:0: class=0x020000 card=0xe0001458 chip=0x816810ec rev=0x06 hdr=0x00
vendor = 'Realtek Semiconductor Co., Ltd.'
device = 'RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller'
class = network
subclass = ethernet
bar [10] = type I/O Port, range 32, base 0xd000, size 256, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xf0004000, size 4096, enabled
bar [20] = type Prefetchable Memory, range 64, base 0xf0000000, size 16384, enabled
cap 01[40] = powerspec 3 supports D0 D1 D2 D3 current D0
cap 05[50] = MSI supports 1 message, 64 bit
cap 10[70] = PCI-Express 2 endpoint MSI 1 max data 128(128)
link x1(x1) speed 2.5(2.5) ASPM disabled(L0s/L1)
cap 11[b0] = MSI-X supports 4 messages, enabled
Table in map 0x20[0x0], PBA in map 0x20[0x800]
cap 03[d0] = VPD
ecap 0001[100] = AER 1 0 fatal 0 non-fatal 0 corrected
ecap 0002[140] = VC 1 max VC0
ecap 0003[160] = Serial 1 01000000684ce000
-------------- next part --------------
ca_root_nss-3.47 Root certificate bundle from the Mozilla Project
drm-fbsd12.0-kmod-4.16.g20191024 DRM modules for the linuxkpi-based KMS components
drm-kmod-g20190710 Metaport of DRM modules for the linuxkpi-based KMS components
gettext-runtime-0.20.1 GNU gettext runtime libraries and programs
gpu-firmware-kmod-g20190825 Firmware modules for the linuxkpi-based KMS components
indexinfo-0.3.1 Utility to regenerate the GNU info page index
libidn-1.35 Internationalized Domain Names command line tool
lynx-2.8.9.1_1,1 Non-graphical, text-based World-Wide Web client
-------------- next part --------------
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p10 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1)
VT(efifb): resolution 1280x1024
CPU: Intel(R) Core(TM) i5-2310 CPU @ 2.90GHz (2893.49-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x206a7 Family=0x6 Model=0x2a Stepping=7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1f9ae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
XSAVE Features=0x1<XSAVEOPT>
VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8251326464 (7869 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Launching APs: 2 3 1
Timecounter "TSC-low" frequency 1446743154 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf7e20000-0xf7e3ffff irq 16 at device 0.0 on pci1
vgapci0: Boot video device
hdac0: <ATI RV930 HDA Controller> mem 0xf7e40000-0xf7e43fff irq 17 at device 0.1 on pci1
pci0: <simple comms> at device 22.0 (no driver attached)
ehci0: <Intel Cougar Point USB 2.0 controller> mem 0xf7f07000-0xf7f073ff irq 16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
hdac1: <Intel Cougar Point HDA Controller> mem 0xf7f00000-0xf7f03fff irq 22 at device 27.0 on pci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci3
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 40:8d:5c:26:9f:a9
re0: netmap queues/slots: TX 1/256, RX 1/256
ehci1: <Intel Cougar Point USB 2.0 controller> mem 0xf7f06000-0xf7f063ff irq 23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
usbus1: 480Mbps High Speed USB v2.0
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel Cougar Point SATA600 controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf09f,0xf080-0xf08f irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
atapci1: <Intel Cougar Point SATA300 controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf030-0xf03f,0xf020-0xf02f irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC887 HDA CODEC> at cad 2 on hdac1
hdaa1: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC887 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm2: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa1
ugen1.1: <Intel EHCI root HUB> at usbus1
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087 product 0x0024> at usbus0
uhub2 on uhub1
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus0
ugen1.2: <vendor 0x8087 product 0x0024> at usbus1
uhub3 on uhub0
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
uhub2: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <ST1000VX005-2EZ102 CV11> ATA8-ACS SATA 3.x device
ada0: Serial Number Z9C5XX2Y
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 953869MB (1953525168 512 byte sectors)
Trying to mount root from ufs:/dev/ada0p3 [rw]...
cd0 at ata4 bus 0 scbus2 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GH24NS95 RN01> Removable CD-ROM SCSI device
cd0: Serial Number KZWD1M94344
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: 0MB (1 0 byte sectors)
usb_alloc_device: set address 3 failed (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
[drm] radeon kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x1682:0x318B 0x00).
[drm:radeon_device_init] Unable to find PCI I/O BAR
[drm:radeon_atombios_init] Unable to find PCI I/O BAR; using MMIO for ATOM IIO
ATOM BIOS: TURKS
drmn0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
drmn0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
Failed to add WC MTRR for [0xe0000000-0xefffffff]: -22; performance may suffer
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 4156400 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading TURKS Microcode
usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_STALLED, ignored)
usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_STALLED
ugen1.3: <Unknown > at usbus1 (disconnected)
uhub_reattach_port: could not allocate new device
drmn0: successfully loaded firmware image with name: radeon/TURKS_pfp.bin
ugen1.3: <Microsoft Microsoft Basic Optical Mouse v2.0> at usbus1
drmn0: successfully loaded firmware image with name: radeon/TURKS_me.bin
drmn0: successfully loaded firmware image with name: radeon/BTC_rlc.bin
ugen1.4: <Microsoft Wired Keyboard 600> at usbus1
ukbd0 on uhub3
ukbd0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus1
kbd2 at ukbd0
drmn0: successfully loaded firmware image with name: radeon/TURKS_mc.bin
drmn0: successfully loaded firmware image with name: radeon/TURKS_smc.bin
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
drmn0: successfully loaded firmware image with name: radeon/SUMO_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
drmn0: WB enabled
drmn0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x0xfffff80004576c00
drmn0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x0xfffff80004576c0c
drmn0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x0xfffff800e0072118
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
drmn0: radeon: MSI limited to 32-bit
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 3 succeeded in 7 usecs
[drm] ring test on 5 succeeded in 3 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Connector DP-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DP-1
[drm] - kern.vt.fb.default_mode
[drm] Connector HDMI-A-1: get mode from tunables:
[drm] - kern.vt.fb.modes.HDMI-A-1
[drm] - kern.vt.fb.default_mode
[drm] Connector DVI-I-1: get mode from tunables:
[drm] - kern.vt.fb.modes.DVI-I-1
[drm] - kern.vt.fb.default_mode
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD1
[drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6480 0x6480 0x6484 0x6484 0x6488 0x6488 0x648c 0x648c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD4
[drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] fb mappable at 0xE0363000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
VT: Replacing driver "efifb" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xe0363000 vbase=0xfffff800e0363000
name=drmn0 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn0: fb0: radeondrmfb frame buffer device
[drm:btc_dpm_set_power_state] rv770_restrict_performance_levels_before_switch failed
[drm] Initialized radeon 2.50.0 20080528 for drmn0 on minor 0
lo0: link state changed to UP
re0: link state changed to DOWN
ums0 on uhub3
ums0: <Microsoft Microsoft Basic Optical Mouse v2.0, class 0/0, rev 1.10/1.04, addr 3> on usbus1
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid0 on uhub3
uhid0: <Microsoft Wired Keyboard 600, class 0/0, rev 1.10/1.10, addr 4> on usbus1
-------------- next part --------------
Looking up portsnap.FreeBSD.org mirrors... 6 mirrors found.
Fetching snapshot tag from ec2-ap-southeast-2.portsnap.freebsd.org... done.
Latest snapshot on server matches what we already have.
No updates needed.
Removing old files and directories... done.
Extracting new files:
/usr/ports/.gitauthors
files/5b15d40f29c6580826de67f52467351d18fd5b47930319949e67aa3897b594d5.gz not found -- snapshot corrupt.
More information about the freebsd-questions
mailing list