Problem with interface em0 - fresh install FreeBSD 12

[Robert Huff]

Zbigniew Komarnicki writes:

>  I install today FreeBSD 12. But when in bsdinstall I was configure the internet 
>  interface, the name of this interface was noting - it was empty in the dialog 
>  window. It was very strange to me. After looking on the log on the screen I saw 
>  something like this:
>  
>  em0: <Intel(R) PRO/1000 Network Connection> port 0xd000-0xd01f mem 0xfe500000-
>  0xfe51ffff,0xfe520000-0xfe523fff irq 46 at device 0.0 on pci3
>  em0: attach_pre capping queues at 1
>  em0: using 1024 tx descriptors and 1024 rx descriptors
>  em0: msix_init qsets capped at 1
>  em0: pxm cups: 6 queues msgs: 0 admincnt: 1
>  em0: using 0 rx queues 0 tx queues
>  em0: Using MSIX interrupts with 1 vectors
>  em0: allocated for 0 tx_queues
>  em0: allocated for 0 rx_queues
>  em0: failed to allocate IRQ for rid 0, name irq0.
>  em0: iflib_legacy_setup failed 12
>  device_attach: em0 attach returned 12
>  
>  I see above the error 12 (failed and returned 12).
>  
>  Can someone help? 

	For comparison:

em0: <Intel(R) PRO/1000 Network Connection> port 0xe800-0xe83f mem 0xfebe0000-0xfebfffff irq 21 at device 6.0 on pci3
em0: Using 1024 tx descriptors and 1024 rx descriptors
em0: Ethernet address: 00:04:23:e5:50:6c
em0: netmap queues/slots: TX 1/1024, RX 1/1024

	Is iflib loaded?  Other than that I have no idea.


			Respectfully,


				Robert Huff