freebsd-questions Digest, Vol 709, Issue 5
Dave B
g8kbvdave at googlemail.com
Thu Jan 11 14:44:57 UTC 2018
I'd say go ahead and try it...
I'd doubt (though I don’t "know") that any damage would be done by
putting "to much" RAM in a system, so lots to gain perhaps, and little
to loose if it doesn’t work.
Regards.
Dave B.
On 11/01/18 13:34, Aryeh Friedman wrote:
>
>
> On Thu, Jan 11, 2018 at 7:14 AM, Dave B via freebsd-questions
> <freebsd-questions at freebsd.org <mailto:freebsd-questions at freebsd.org>>
> wrote:
>
> That I suspect depends on how many physical address lines are
> available
> for it via the memory management system.
>
> If the PC documentation says 8G is the max', then that is probably all
> that'll be seen by the CPU, even if there is 16G installed.
>
> There is only one way to find out for sure, at your expense.
>
> Personally, I doubt it, and the info at
> https://support.hp.com/gb-en/document/c03363664
> <https://support.hp.com/gb-en/document/c03363664> says it wont.
>
>
> I have bought the memory (I can use it in an other machine worst comes
> to worst) have not installed it yet but in doing deeper research I got
> a even stranger disagreement between what it appears the machine can
> physically handle and what the manual says. Output of sysutils/dmidecode:
>
> Handle 0x000A, DMI type 16, 23 bytes
> Physical Memory Array
> Location: System Board Or Motherboard
> Use: System Memory
> Error Correction Type: None
> Maximum Capacity: 128 GB
> Error Information Handle: Not Provided
> Number Of Devices: 2
>
> Handle 0x000C, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x000A
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 4096 MB
> Form Factor: DIMM
> Set: None
> Locator: A1_DIMM0
> Bank Locator: A1_BANK0
> Type: DDR3
> Type Detail: Synchronous
> Speed: 1333 MT/s
> Manufacturer: Samsung
> Serial Number: 938D8E07
> Asset Tag: A1_AssetTagNum0
> Part Number: M378B5273CH0-CH9
> Rank: 2
> Configured Clock Speed: 667 MT/s
>
> Handle 0x000E, DMI type 17, 34 bytes
> Memory Device
> Array Handle: 0x000A
> Error Information Handle: Not Provided
> Total Width: 64 bits
> Data Width: 64 bits
> Size: 4096 MB
> Form Factor: DIMM
> Set: None
> Locator: A1_DIMM1
> Bank Locator: A1_BANK1
> Type: DDR3
> Type Detail: Synchronous
> Speed: 1333 MT/s
> Manufacturer: Samsung
> Serial Number: 938D8C71
> Asset Tag: A1_AssetTagNum1
> Part Number: M378B5273CH0-CH9
> Rank: 2
> Configured Clock Speed: 667 MT/s
>
> --
> Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org
More information about the freebsd-questions
mailing list