VirtualBox and bridging lagg interface problem

[Mario Lobo]

Hi there;

PC:
FreeBSD 11.2-STABLE #0 r336831

rc.conf:
wlans_iwm0="wlan0"
ifconfig_wlan0="WPA powersave"
ifconfig_re0="media 1000baseTX mediaopt full-duplex up"
ifconfig_re0="ether f8:94:c2:26:f3:54"
ifconfig_lagg0="up laggproto failover laggport re0 laggport wlan0 DHCP"
wpa_supplicant_enable="YES"
wpa_supplicant_program="/usr/local/sbin/wpa_supplicant"
cloned_interfaces="lagg0"

OBS - tried cloning re0 MAC into wlan0 and it didn
ifconfig:

re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80088<VLAN_MTU,VLAN_HWCSUM,LINKSTATE>
        ether f8:94:c2:26:f3:54
        hwaddr fc:45:96:fb:3d:82
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active
wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether f8:94:c2:26:f3:54
        hwaddr f8:94:c2:26:f3:54
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet DS/1Mbps mode 11g
        status: associated
        ssid "Seaway Airport" channel 11 (2462 MHz 11g) bssid
6c:70:9f:da:15:5a
        regdomain FCC country US authmode WPA2/802.11i privacy ON
        deftxkey UNDEF TKIP 2:128-bit TKIP 3:128-bit powersavemode CAM
        powersavesleep 100 txpower 30 bmiss 10 scanvalid 60 protmode CTS wme
        roaming MANUAL
        groups: wlan
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether f8:94:c2:26:f3:54
        inet 10.3.51.3 netmask 0xffffff00 broadcast 10.3.51.255
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: active
        groups: lagg
        laggproto failover lagghash l2,l3,l4
        laggport: re0 flags=5<MASTER,ACTIVE>
        laggport: wlan0 flags=0<>


-- 
Mario Lobo
http://www.mallavoodoo.com.br
FreeBSD since version 2.2.8 [not Pro-Audio.... YET!!]