more etc/wpa* and rtc.conf-1

Fri Jan 6 16:58:35 UTC 2017

Allow me to summarize the various replies...

On Fri, 06 Jan 2017 16:33:03 +0100, swjatoslaw gerus wrote:
> Task performed 

Good!

> > network={
> >  	ssid="somessid"
> >  	identity="someidentity"
> >  	password="somepassword"
> >  	key_mgmt=WPA-EAP
> > }
> 
> performed poweroff -poweron
> 
> service netif restart

You _either_ reboot _or_ run "service netif restart", it's
not needed to do _both_.

> dhclient not running ? (check /var/run/dhclient.msk0.pid).
> Stopping network :lo0 msk0
> 
> text ...
> 
> msk0 
> status no carriier 

Again: That is the wired network card, which is obviously
not connected, so just _ignore it_.

WHat about the messages for the wireless adapter (iwn0, wlan0)?

On Fri, 06 Jan 2017 16:49:27 +0100, swjatoslaw gerus wrote:
> 
> > > 
> > > Replace <SSID> with the SSID you want to connect to, and
> > > <key> with the corresponding password.
> > > 
> > > Add those to /etc/rc.conf:
> > > 
> > > 	wlans_iwn0="wlan0"			<=== THOSE ARE
> > > 	ifconfig_wlan0="WPA SYNCDHCP"		<=== MISSING!
> 
>  That possible  step  in right direction

That _is_ the right direction! :-)

> > > Then just restart networking:
> > > 
> > > 	# service netif restart
> > > 
> > > The wireless connection should be up now.
> > > 
> > > For diagnostic purposes, do the following "step by step" and
> > > check if (and where) problems occur:
> > > 
> > > 	# ifconfig wlan0 create wlandev iwn0
> > > 	# wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant.conf  
> > > 	# dhclient wlan0
> >
> 
>  wlan running  channel 36 5180 mhz 

See? It's not complicated when you follow the instructions.

> ... but after   sony dhclient send_paket :No buffer availible 
> sony last message   repeated 9 times 

Putting this error message into a search machine reults in
a quite interesting page:

https://forums.freebsd.org/threads/45605/

Try changing

	ifconfig_wlan0="WPA SYNCDHCP"

to

	ifconfig_wlan0="WPA DHCP"

in /etc/rc.conf. Or might it be possible that you're trying
to get an address via DHCP from the _not connected_ wired
network card? To make sure that isn't a problem, add

	ifconfig_msk0="down"

to /etc/rc.conf

On Fri, 06 Jan 2017 16:58:59 +0100, swjatoslaw gerus wrote:
> ifconfig wlan0
> 
> inet 0.0.0.0 netmask  0xff000000 broadcast 255.255.255.255
> nd6 options=29
> media :IEEE 802.11  Wireless Ethernet autoselect
> status : no  carrier 
> ssid "" channel 1 (2412 mhz 11g ht/20)
> regdomain FCC country US authomode  WPA1+WPA2/802.11i  privacy ON
> deftxkey UNDEF txpower 30 bmiss 10 scanvalid 60 protmode CTS
> ampdulimit 8k -amsdutx amsdurx shortgi -stbc wme roaming MANUAL
> groups: wlan 
> 
> #####################################
> 
> ssid ""    - ?      " author ssid would entried from start 

No. The SSID is entered in /etc/wpa_supplicant.conf, as
several answers have already shown.

It _might_ be possible that "regdomain FCC country US" is
causing trouble. I have no idea how it got into your
configuration. Maybe you comment that particular line
out, for testing? (It's in /etc/rc.conf, according to
your previous post.)

On Fri, 06 Jan 2017 17:12:54 +0100, swjatoslaw gerus wrote:
> for ifconfig wlan0  copy belov  ,suspect rc.conf some false ,but  part
> of rc.conf was
> edited from graphics by loader downloading  ( false from start )

Yes, the installer creates /etc/rc.conf and inserts the values
which you've selected during installation (_not_ download!).

> cat wpa*
> 
> network = {
>   ssid= " myssid"
>   key_mgmt=WPA-EAP
>   identity= "  myiden at uni-hamburg.de"
>   password=" mypasswd"
> 
> }

There are spaces which probably don't belong there. Make sure
there are _no_ spaces, i. e.:

	network={
		ssid="myssid"
		key_mgmt=WPA-EAP
		identity="myiden at uni-hamburg.de"
		password="mypasswd"
	}

Note that spaces matter.

> cat rc.conf
> 
> hostname=" sony"
> keymap ="german.iso.kbd"
> ifconfig_msk0= "DHCP"

Ha! Here we have it. Why do you try to obtain an IP from a
network card that has no cable in it? Comment that line,
or change it as mentioned above.

> defaultrouter=""

Enter the router info that you got from the WLAN maintainer.
It should be in the instructions, and the Linux version will
also name it correctly.

> ifconfig_msk0_ipv6= " inet6 accept_rtadv"

Comment it out.

> create_args_wlan0=" country US  regdomain FCC"

Comment that one out, too.

> wlans_iwn0="wlan0"
> ifconfig_wlan0="WPA SYNCDHCP"

Those are correct. If SYNCDHCP doesn't work, try DHCP.

> local _unbound_enable= "YES"

Here is a space that doesn't belong there.

> sshd_enable= "YES"
> moused enable="YES"
> dumpdev=AUTO" 

Okay.

> ifconfig_msk0 ?
> defaultrouter =""   ?
> wlans  or wlan ?

As explained in the documentation, and in this message "thread",
several times. THe correct form is:

	wlans_iwn0="wlan0"