that possible step in right direction .. . Last change what was performed and which result after
swjatoslaw gerus
milstar2 at eml.cc
Fri Jan 6 16:24:16 UTC 2017
that possible step in right direction .. . Last change what was
performed and which result after
################################################################
1 .wpa* and rc* changed
copy
cat wpa*
network = {
ssid= " myssid"
key_mgmt=WPA-EAP
identity= " myiden at uni-hamburg.de"
password=" mypasswd"
}
------------------------------------------------------------
cat rc.conf
hostname=" sony"
keymap ="german.iso.kbd"
ifconfig_msk0= "DHCP"
defaultrouter=""
ifconfig_msk0_ipv6= " inet6 accept_rtadv"
create_args_wlan0=" country US regdomain FCC"
wlans_iwn0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
local _unbound_enable= "YES"
sshd_enable= "YES"
moused enable="YES"
dumpdev=AUTO"
################################
than are questions from author
ifconfig_msk0 ?
defaultrouter ="" ?
wlans or wlan ?
2. after change -service netif restart (before last change used
multiple time's ... without result)
##################################
after
3.ifconfig wlan0
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
nd6 options=29
media :IEEE 802.11 Wireless Ethernet autoselect
status : no carrier
ssid "" channel 1 (2412 mhz 11g ht/20)
regdomain FCC country US authomode WPA1+WPA2/802.11i privacy ON
deftxkey UNDEF txpower 30 bmiss 10 scanvalid 60 protmode CTS
ampdulimit 8k -amsdutx amsdurx shortgi -stbc wme roaming MANUAL
groups: wlan
############
Polytropon wrote: (copy)
Replace <SSID> with the SSID you want to connect to, and
<key> with the corresponding password.
Add those to /etc/rc.conf:
wlans_iwn0="wlan0" <===
THOSE ARE
ifconfig_wlan0="WPA SYNCDHCP" <===
MISSING!
author performed ,that what you stated .. .some advanced
but are you sure wlans ... wlan
wlan
###################################
or wlans must be wlan ?
--
http://www.fastmail.com - Access your email from home and the web
More information about the freebsd-questions
mailing list