Serial port ttyS0

[scrat]

On 02/13/17 12:01, Kristof Provost wrote:
> On 13 Feb 2017, at 16:55, scrat wrote:
>
>     using screen /dev/cuaU0 115200 didn't work either.
>     I am still researching for a solution
>     Thanks
>
> Can you try |sysctl dev.uplcom| ?
>
> I’d expect to see something like this:
>
> |dev.uftdi.0.ttyports: 1 dev.uftdi.0.ttyname: U0 dev.uftdi.0.%parent:
> uhub5 dev.uftdi.0.%pnpinfo: vendor=0x0403 product=0x9e90 devclass=0x00
> devsubclass=0x00 devproto=0x00 sernum="FTUF96Z5" release=0x0500
> mode=host intclass=0xff intsubclass=0xff intprotocol=0xff ttyname=U0
> ttyports=1 dev.uftdi.0.%location: bus=0 hubaddr=1 port=2 devaddr=2
> interface=0 ugen=ugen0.2 dev.uftdi.0.%driver: uftdi dev.uftdi.0.%desc:
> OpenRD JTAGKey FT2232D B |
>
> (Obviously I have a different driver).
> The ttyname shows that I have /dev/ttyU0, which is an “OpenRD JTAGKey
> FT2232D B”
>
> Regards,
> Kristof
>


root at desktop:~ # sysctl dev.uplcom
dev.uplcom.0.ttyports: 1
dev.uplcom.0.ttyname: U0
dev.uplcom.0.%parent: uhub1
dev.uplcom.0.%pnpinfo: vendor=0x067b product=0x2303 devclass=0x00 
devsubclass=0x00 devproto=0x00 sernum="" release=0x0300 mode=host 
intclass=0xff intsubclass=0x00 intprotocol=0x00 ttyname=U0 ttyports=1
dev.uplcom.0.%location: bus=1 hubaddr=1 port=4 devaddr=2 interface=0 
ugen=ugen1.2
dev.uplcom.0.%driver: uplcom
dev.uplcom.0.%desc: Prolific Technology Inc. USB-Serial Controller, 
class 0/0, rev 2.00/3.00, addr 1
dev.uplcom.%parent: