Can't print to HP LJ 1020 using foo2zjs and CUPS

[Bernt Hansson]

On 2015-10-09 22:02, Alnis Morics wrote:
> Hi,
>
> I'm trying to set up HP LaserJet 1020 on 10.2-RELEASE with CUPS and
> foo2zjs. That worked on previous versions of FreeBSD, although there
> were changes with devices to use (I gues it was ulpt to ugen and back to
> ulpt in 10.0).
>
> But now none of them works for me.
> If I use ulpt, the moment I plug in the printer or turn it on:
>
> ugen3.2: <Hewlett-Packard> at usbus3 (disconnected)
> ugen3.2: <Hewlett-Packard> at usbus3
> ugen3.2: <Hewlett-Packard> at usbus3 (disconnected)
> ugen3.2: <Hewlett-Packard> at usbus3
> ulpt0: <Hewlett-Packard HP LaserJet 1020, class 0/0, rev 2.00/1.00, addr
> 2> on usbus3
> ulpt0: using bi-directional mode
> ulpt0: offline
>
> CUPS doesn't find this printer. I can still add it manually but when I
> try to print, nothing happens, and there are no error messages. I found
> out that it is exactly after the firmware is downloaded that ulpt0 turns
> offline (should it?).
>
> If I use ugen (rebuilt CUPS with LIBUSB, moved away
> /boot/kernel/ulpt.ko), then CUPS detects the printer but no firmware
> gets downloaded, and, of course, I can't print. When I try to send the
> firmware manually
>
> cat /usr/share/foo2zjs/firmware/sihp1020.dl > /dev/ugen3.2 (or
> /dev/usb/3.2.0)
>
> the result is an input/output error.
>
> Any ideas of what might be wrong or how it should work now?
>
>
> Permissions in /etc/devfs.rules:
> # Begin printers_foo2zjs (added by foo2zjs/freebsd-install)
> [printers_foo2zjs=42]
> add path 'ulpt*' mode 0660 group cups
> add path 'unlpt*' mode 0660 group cups
> add path 'ugen*' mode 0660 group cups
> add path 'usb/*' mode 0770 group cups
> # End printers_foo2zjs (added by foo2zjs/freebsd-install)

Try unlpt instead of ulpt.