Help! carp slave take over as master at boot!

[motty cruz]

Hi thanks for your reply;

Machine A (master)
ifconfig_igb0_alias0="inet vhid 31 advbase 12 advskew 40 pass password2
19.16.31.80/24"

Machine B (slave)
ifconfig_igb0_alias0="inet vhid 31 advbase 12 advskew 80 pass  password2
19.16.31.80/24"

if I reboot slave, on boot it takes over as Master, any idea why?
both machines: /etc/sysctl.conf
# net.inet.carp.preempt=1

On Mon, May 11, 2015 at 10:45 PM, Trond Endrestøl <
Trond.Endrestol at fagskolen.gjovik.no> wrote:

> On Mon, 11 May 2015 14:11-0700, Motty Cruz wrote:
>
> > Hello, I have two machines running FreeBSD 10.1 Release. Machine A is the
> > master in Carp with advskew 20 and Machine B slave with advskew 200 both
> are
> > set to advbase 10. however, slave machine becomes Master on boot;
> >
> > my questions is, how do I configure both machines so if reboot any of the
> > machines whatever machine is Master stays master if secondary machine
> reboot.
>
> You should augment your posting with facts. You may withhold any
> sensitive information such as IP addresses, but a copy of the relevant
> lines from /etc/rc.conf and /etc/sysctl.conf would be helpful.
>
> Have you tried setting:
>
> net.inet.carp.preempt=1
>
> in /etc/sysctl.conf?
>
> Try the command:
>
> sysctl net.inet.carp.preempt=1
>
> to see any immediate effect.
>
> --
> +-------------------------------+------------------------------------+
> | Vennlig hilsen,               | Best regards,                      |
> | Trond Endrestøl,              | Trond Endrestøl,                   |
> | IT-ansvarlig,                 | System administrator,              |
> | Fagskolen Innlandet,          | Gjøvik Technical College, Norway,  |
> | tlf. mob.   952 62 567,       | Cellular...: +47 952 62 567,       |
> | sentralbord 61 14 54 00.      | Switchboard: +47 61 14 54 00.      |
> +-------------------------------+------------------------------------+




-- 
Thanks for your support,
Motty