Anyone had experince setting up gnokii

[Steve Burton]

On 26/12/2014 20:37, Adrian Chadd wrote:
> Hi,
>
> I thought gnokii worked on a real serial port, not a ugen device.
>
> ugen is the generic USB device that userland USB drivers would use.
>
> I think gnokii expects the device /  port there to be a serial device,
> USB or otherwise.
>
> So, what cable are you using? and whats the output of "dmesg" and
> "usbconfig list" say?
>
>
>
> -adrian
>
>
> On 24 December 2014 at 02:05, Godfrey Hamshire
> <freebsdlist at compudoc.za.org> wrote:
>> Hello
>>
>> I have got a Nokia N79 and am trying to set it up to send sms's I am not
>> wanting any thing fancy just to send me sms's in addition to the other
>> notification methods I already employ for power outages loss of connectivity
>> etc etc.
>>
>> I have managed to get this far and am stuck
>>
>> Initializing AT capable mobile phone ...
>> Serial device: opening device /dev/ugen4.2
>> Gnokii serial_open: tcgetattr: Inappropriate ioctl for device
>> Couldn't open ATBUS device: Inappropriate ioctl for device
>>
>> No matter what I try I am unable to proceed beyond this point
>>
>>
>> Google is not much help here I was wondering what suggestions you guys might
>> have.
>>
>> Regards
>>
>> Godfrey
>>
>>
>>
>>
>> root at 32.165 ~ # usbconfig ; gnokii --identify
>> ugen0.1: <UHCI root HUB VIA> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
>> pwr=SAVE (0mA)
>> ugen4.1: <EHCI root HUB VIA> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps)
>> pwr=SAVE (0mA)
>> ugen3.1: <UHCI root HUB VIA> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
>> pwr=SAVE (0mA)
>> ugen2.1: <UHCI root HUB VIA> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
>> pwr=SAVE (0mA)
>> ugen1.1: <UHCI root HUB VIA> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps)
>> pwr=SAVE (0mA)
>> ugen4.2: <N79 Nokia> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
>> (100mA)
>> GNOKII Version 0.6.31
>> LOG: debug mask is 0x1
>> Config read from file /usr/local/etc/gnokiirc.
>> phone instance config:
>> model = AT
>> port = /dev/ugen4.2
>> connection = serial
>> initlength = default
>> serial_baudrate = 115200
>> serial_write_usleep = 5000
>> handshake = hardware
>> require_dcd = 0
>> smsc_timeout = 60
>> rfcomm_channel = 0
>> sm_retry = 0
>> Initializing AT capable mobile phone ...
>> Serial device: opening device /dev/ugen4.2
>> Gnokii serial_open: tcgetattr: Inappropriate ioctl for device
>> Couldn't open ATBUS device: Inappropriate ioctl for device
>> AT bus initialization failed (1)
>> Initialization failed (1)
>> Serial device: closing device
>> Telephone interface init failed: Command failed.
>> Quitting.
>> Command failed.
>> _______________________________________________
>> freebsd-questions at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
As I recall, gnokii (and smstools) expects a /dev/cua* device. If your 
device is ugen, I think it means unrecognized in this context.

Steve.