smartd

[ajtiM]

Hi!

I installed smartmontools, "start_smartd=yes" I have in rc.conf and I edited 
/usr/local/etc/smart.conf where I have:
/dev/ada0 -a -d auto -o on -S on -s (S/../.././02|L/../../6/03) -m root
When I use top there are no smartd and if I run smartd again than top shows me 
smartd for few seconds and than it gone.

smartctl -d auto -i /dev/ada0 show:

smartctl 6.1 2013-03-16 r3800 [FreeBSD 9.1-RELEASE i386] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Caviar SE
Device Model:     WDC WD800JB-00FSA0
Serial Number:    WD-WCAJD1048022
Firmware Version: 77.07W77
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-6 (minor revision not indicated)
Local Time is:    Sun Mar 31 17:11:23 2013 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

ps auxww | grep smartd shows:

root       1342   0.0  0.1  11004   2304 ??  I    11:32AM   0:00.02 
/usr/local/sbin/smartd -c /usr/local/etc/smartd.conf -p /var/run/smartd.pid
root       1659   0.0  0.1  11004   2340 ??  I    11:33AM   0:00.02 smartd
root       1668   0.0  0.1  11004   2340 ??  I    11:35AM   0:00.02 smartd
root       7553   0.0  0.1  11004   2364 ??  I    11:41AM   0:00.02 smartd
root       8589   0.0  0.2  11004   3476 ??  I     3:48PM   0:00.01 smartd
root       8936   0.0  0.1   9636   1688  1  S+    5:22PM   0:00.00 grep 
smartd

Are my settings correct, please? Is it good that I put in /etc/periodic.conf:
daily_status_smart_devices="/dev/ada0

Thanks in advance.


Mitja
----------
http://www.redbubble.com/people/lumiwa