help needed for connecting internet with ZTE ac 8700 USB cdma ( EvDO) modem

[Subhasish Chakraborty]

I am new to Free bsd and installed PC-BSD 9 recently in my desktop. Its a
dual boot with windows 7 and I use ZTE ac8700 to connect to internet. From
windows the Usb stick is working fine ahe driver for windows need phone no
#777 , username and password to connect . I tested the device and its
working fine in Linux too . But in PC-BSD neither  the default gui is
working nor the CLI is clicking. A wvdial port might have helped as in
linux it worked like charm with real easy configuration. I have some
duckduckgo-ing and tryed to edit a few configuration on my own as gui is
not helping .

In my my PC-BSD /etc/ppp/ppp.conf file looks like .


default:

set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)

set device /dev/cuaU0.0

set speed 115200

set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180 # 3 minute idle timer (the default)

enable dns # request DNS info (for resolv.conf)




isp:

set phone #777

set authname Username

set authkey pass

set dns 208.67.220.220 208.67.222.222 # openDNS

#set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0

# add default HISADDR
enable dns




Now ppp -ddial isp gives me



kernel: tun0: link state changed to UP

ppp[18473]: tun0: Warning: Chat script failed

in /var/log/messages ..

can someone please put some light on whats wrong in here or please help me
to write a ppp.config

Here's the output of my pc configuration ..

usbconfig

ugen0.1: <OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen1.1: <OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen2.1: <OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen3.1: <OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen4.1: <OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps)
pwr=SAVE
ugen5.1: <EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps)
pwr=SAVE
ugen0.2: <product 0x08da vendor 0x046d> at usbus0, cfg=0 md=HOST spd=FULL
(12Mbps) pwr=ON
ugen0.3: <ZTE CDMA Tech ZTE, Incorporated> at usbus0, cfg=0 md=HOST
spd=FULL (12Mbps) pwr=ON


sysctl -a dev.u3g

dev.u3g.0.%desc: Data Interface
dev.u3g.0.%driver: u3g
dev.u3g.0.%location: bus=1 hubaddr=2 port=0 devaddr=3 interface=0
dev.u3g.0.%pnpinfo: vendor=0x19d2 product=0xfffe devclass=0x00
devsubclass=0x00 sernum="" release=0x0000 mode=host intclass=0xff
intsubclass=0xff intprotocol=0xff ttyname=U0 ttyports=4
dev.u3g.0.%parent: uhub0


ls -l /dev/cuaU*

crw-rw---- 1 uucp dialer 0, 153 Feb 2 13:39 /dev/cuaU0.0
crw-rw---- 1 uucp dialer 0, 154 Feb 2 13:30 /dev/cuaU0.0.init
crw-rw---- 1 uucp dialer 0, 155 Feb 2 13:30 /dev/cuaU0.0.lock
crw-rw---- 1 uucp dialer 0, 159 Feb 2 13:30 /dev/cuaU0.1
crw-rw---- 1 uucp dialer 0, 160 Feb 2 13:30 /dev/cuaU0.1.init
crw-rw---- 1 uucp dialer 0, 161 Feb 2 13:30 /dev/cuaU0.1.lock
crw-rw---- 1 uucp dialer 0, 165 Feb 2 13:30 /dev/cuaU0.2
crw-rw---- 1 uucp dialer 0, 166 Feb 2 13:30 /dev/cuaU0.2.init
crw-rw---- 1 uucp dialer 0, 167 Feb 2 13:30 /dev/cuaU0.2.lock
crw-rw---- 1 uucp dialer 0, 171 Feb 2 13:30 /dev/cuaU0.3
crw-rw---- 1 uucp dialer 0, 172 Feb 2 13:30 /dev/cuaU0.3.init
crw-rw---- 1 uucp dialer 0, 173 Feb 2 13:30 /dev/cuaU0.3.lock
..
thanks