Kodak C195 digital camera appears to affect WD on usb

[Steven Friedrich]

I know you'll think I'm crazy, but I'm pretty sure I've only started seeing 
these errors since plugging in this camera.

Mar 22 01:06:22 laptop2 kernel: umass0: <Western Digital My Book, class 0/0, 
rev 2.00/1.75, addr 2> on usbus4
Mar 22 01:06:22 laptop2 kernel: Root mount waiting for: usbus4
Mar 22 01:06:22 laptop2 kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
Mar 22 01:06:22 laptop2 kernel: da0: <WD 5000AAV External 1.75> Fixed Direct 
Access SCSI-4 device 
Mar 22 01:06:22 laptop2 kernel: da0: 40.000MB/s transfers
Mar 22 01:06:22 laptop2 kernel: da0: 476940MB (976773168 512 byte sectors: 
255H 63S/T 60801C)


Mar 22 01:10:24 laptop2 root: Unknown USB device: vendor 0x040a product 0x0600 
bus uhub2
Mar 22 01:10:24 laptop2 kernel: ugen2.2: <Eastman Kodak Company> at usbus2
Mar 22 01:10:24 laptop2 kernel: umass1: <Eastman Kodak Company KODAK EASYSHARE 
C195 Digital Camera, class 0/0, rev 1.10/1.00, addr 2> on usbus2
Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): TEST UNIT READY. 
CDB: 0 0 0 0 0 0 
Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): CAM status: SCSI 
Status Error
Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): SCSI status: Check 
Condition
Mar 22 01:10:26 laptop2 kernel: (probe0:umass-sim1:1:0:0): SCSI sense: NOT 
READY asc:3a,2 (Medium not present - tray open)
Mar 22 01:11:32 laptop2 wpa_supplicant[413]: CTRL-EVENT-SCAN-RESULTS 
Mar 22 01:12:06 laptop2 login: 2 LOGIN FAILURES ON ttyv0
Mar 22 01:12:09 laptop2 login: ROOT LOGIN (root) ON ttyv0


Mar 22 01:12:19 laptop2 kernel: ugen2.2: <Eastman Kodak Company> at usbus2 
(disconnected)
Mar 22 01:12:19 laptop2 kernel: umass1: at uhub2, port 1, addr 2 
(disconnected)

I  believe these  next two were caused by the camera on umass-sim1

Mar 22 01:12:21 laptop2 kernel: (da0:umass-sim0:0:0:0): AutoSense failed
Mar 22 01:12:21 laptop2 kernel: g_vfs_done():da0s1f[WRITE(offset=5780930560, 
length=16384)]error = 5

Here's a little config info:

dmesg when plugging in camera

ugen2.2: <Eastman Kodak Company> at usbus2
umass1: <Eastman Kodak Company KODAK EASYSHARE C195 Digital Camera, class 0/0, 
rev 1.10/1.00, addr 2> on usbus2
(probe0:umass-sim1:1:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim1:1:0:0): CAM status: SCSI Status Error
(probe0:umass-sim1:1:0:0): SCSI status: Check Condition
(probe0:umass-sim1:1:0:0): SCSI sense: NOT READY asc:3a,2 (Medium not present 
- tray open)

usbconfig
ugen0.1: <UHCI root HUB Intel> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) 
pwr=SAVE
ugen1.1: <UHCI root HUB Intel> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) 
pwr=SAVE
ugen2.1: <UHCI root HUB Intel> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) 
pwr=SAVE
ugen3.1: <UHCI root HUB Intel> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) 
pwr=SAVE
ugen4.1: <EHCI root HUB Intel> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=SAVE
ugen4.2: <My Book Western Digital> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) 
pwr=ON
ugen3.2: <USB Receiver Logitech> at usbus3, cfg=0 md=HOST spd=LOW (1.5Mbps) 
pwr=ON
ugen2.2: <KODAK EASYSHARE C195 Digital Camera Eastman Kodak Company> at 
usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON




-----------------------------------------------------------------------------------------------------
System Name:         laptop2.StevenFriedrich.org
Window Manager(s):   kde4-4.5.5_1 
X Window System:     xorg-7.5.1    X.Org X Server 1.7.7
OS version:          FreeBSD 8.2-RELEASE i386 (5.2 MB kernel)
Platform:            HP pavilion zd8000 (zd8215us)
CPU:                 2.80GHz Intel Pentium 4 (HTT) with 2 GB memory

-----------------------------------------------------------------------------------------------------
FreeBSD Audio Driver (newpcm: 32bit 2009061500/i386)
Installed devices:
pcm0: <Intel ICH6 (82801FB)> (play/rec) default