RTL8168/8111 Not Being Assigned to Interface
Al Plant
noc at hdk5.net
Fri Nov 21 12:35:25 PST 2008
hamtilla wrote:
> I'm running 7.0-RELEASE-i386 on Jetway's NC92-N230 mainboard. The board has
> one integrated RTL8168/8111 gigabit NIC as well as an expansion board with
> three RTL8168/8111 NICs.
>
> none2 at pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816810ec
> rev=0x02 hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8168/8111 PCI-E Gigabit Ethernet NIC'
> class = network
> subclass = ethernet
> re0 at pci0:2:4:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
> hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
> class = network
> subclass = ethernet
> re1 at pci0:2:6:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
> hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
> class = network
> subclass = ethernet
> re2 at pci0:2:7:0: class=0x020000 card=0x10ec16f3 chip=0x816710ec rev=0x10
> hdr=0x00
> vendor = 'Realtek Semiconductor'
> device = 'RTL8169/8110 Family Gigabit Ethernet NIC'
> class = network
> subclass = ethernet
>
>
> Why would the three NICs work while the onboard NIC does not? I would
> imagine the same driver services both controllers. Do I need to assign an
> interface to the device somehow?
>
> Thank you!
Aloha,
I use the same PCI cards in a number of servers. All work fine. But on
board ones are only 100 so I dont use them.
However I notice that the on board nic in your case uses a different
chipset:
chip=0x816810ec is onboard.
chip=0x816710ec is slot pci's.
I dont know what this means in respect to operation problems though.
--
~Al Plant - Honolulu, Hawaii - Phone: 808-284-2740
+ http://hawaiidakine.com + http://freebsdinfo.org +
+ http://aloha50.net - Supporting - FreeBSD 6.* - 7.* - 8.* +
< email: noc at hdk5.net >
"All that's really worth doing is what we do for others."- Lewis Carrol
More information about the freebsd-questions
mailing list