configuring X11, no screens found
David Alanis
canito at dalan.us
Sat Jan 26 08:03:34 PST 2008
Zbigniew:
If you did an x11 user from the install disk you wont be able to run
x11 right off the bat. I would recommend searching the archive for a
solution thus this has been asked many times. Here I will make it
easier for you. Search for this thread:
x11 missing modules on 7.0rc1 ?
Here:
http://lists.freebsd.org/pipermail/freebsd-questions/2008-January/thread.html
Here is my xorg.conf file http:www/dalan.us/download/xorg.conf
use it for reference!
Thanks:
David Alanis
Quoting Zbigniew Szalbot <zszalbot at gmail.com>:
> Hello,
>
> I hope yo can point me in the right direction. I have never installed
> X11 but need it now so want to configure it. There are some errors I
> get:
>
> (II) Setting vga for screen 0.
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
> (II) Loading /usr/local/lib/xorg/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.4.0, module version = 0.1.0
> ABI class: X.Org Video Driver, version 2.0
> (II) I810(0): Creating default Display subsection in Screen section
> "Builtin Default i810 Screen 0" for depth/fbbpp 24/32
> (==) I810(0): Depth 24, (==) framebuffer bpp 32
> (EE) I810(0): Given bpp (32) is not supported by i810 driver
> (II) UnloadModule: "i810"
> (II) UnloadModule: "vgahw"
> (II) Unloading /usr/local/lib/xorg/modules//libvgahw.so
> (EE) Screen(s) found, but none have a usable configuration.
>
> Fatal server error:
> no screens found
>
> The content of /root/xorg.conf.new
>
> cat /root/xorg.conf.new |grep -40 Screen
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> RgbPath "/usr/local/share/X11/rgb"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> FontPath "/usr/local/lib/X11/fonts/OTF"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
> Load "GLcore"
> Load "dbe"
> Load "dri"
> Load "extmod"
> Load "glx"
> Load "record"
> Load "xtrap"
> Load "freetype"
> Load "type1"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> #DisplaySize 320 240 # mm
> Identifier "Monitor0"
> VendorName "GSM"
> ModelName ""
> ### Comment all HorizSync and VertRefresh values to use DDC:
> HorizSync 30.0 - 71.0
> VertRefresh 50.0 - 160.0
> Option "DPMS"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> Identifier "Card0"
> Driver "i810"
> VendorName "Intel Corporation"
> BoardName "82815 Chipset Graphics Controller (CGC)"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> I happen to have LG Flatron T710BH monitor but have no idea about its
> resolution and so on. What can I do to configure X11?
>
> I do want to base it on FreeBSD (6.3) without erasing data and
> installing PCBSD or NetBSD.
>
> Thank you in advance!
>
> Zbigniew Szalbot
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
More information about the freebsd-questions
mailing list