Network Help

[Derek Ragona]

At 10:01 AM 2/13/2008, Victor Farah wrote:
>I'm updating the system to 6.3-release now.
>
>All 13 machines are on the same subnet but they are scattered across 
>different switchs.
>
>netstat -m:
>7716/399/8115 mbufs in use (current/cache/total)
>7388/326/7714/25600 mbuf clusters in use (current/cache/total/max)
>7380/41 mbuf+clusters out of packet secondary zone in use (current/cache)
>0/0/0/0 4k (page size) jumbo clusters in use (current/cache/total/max)
>0/0/0/0 9k jumbo clusters in use (current/cache/total/max)
>0/0/0/0 16k jumbo clusters in use (current/cache/total/max)
>16705K/751K/17456K bytes allocated to network (current/cache/total)
>0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
>0/0/0 requests for jumbo clusters denied (4k/9k/16k)
>0/6/6656 sfbufs in use (current/peak/max)
>0 requests for sfbufs denied
>0 requests for sfbufs delayed
>0 requests for I/O initiated by sendfile
>193374 calls to protocol drain routines
>
>ifconfig -a:
>em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         options=b<RXCSUM,TXCSUM,VLAN_MTU>
>         inet 192.168.X.X netmask 0xffffff00 broadcast 192.168.X.255
>         ether 00:1b:fc:ef:34:de
>         media: Ethernet autoselect (1000baseTX <full-duplex>)
>         status: active
>em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>         options=b<RXCSUM,TXCSUM,VLAN_MTU>
>         inet X.X.X.X netmask 0xffffff00 broadcast X.X.X.255
>         ether 00:1b:fc:ef:34:df
>         media: Ethernet 1000baseTX <full-duplex>
>         status: active
>plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
>lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
>         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
>         inet6 ::1 prefixlen 128
>         inet 127.0.0.1 netmask 0xff000000

What IP's are you trying to configure on em0 and em1?  These cannot be on 
the same subnet unless you are trying to bond them, which I don't believe 
is available in 6.X.

         -Derek

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.