problems with jail

[Jim Stapleton]

It still does not function. I noticed the netmask and broadcast do not
look right, could this be it?

root at elrond 16:26:28 (0) ~  > ifconfig
nve0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        inet 192.168.1.84 netmask 0xffffff00 broadcast 192.168.1.255
        inet 192.168.1.85 netmask 0xffffffff broadcast 192.168.1.85
        ether 00:13:d4:2e:2f:62
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
        inet6 ::1 prefixlen 128
        inet 127.0.0.1 netmask 0xff000000



On 2/23/07, Jeff Palmer <questions at totaldiver.net> wrote:
> At 02:38 PM 2/23/2007, Jim Stapleton wrote:
> >new host rc.conf:
> >
> >hostname="elrond.ameritech.net"
> >#ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0"
> >ipv4_addrs_nve0="192.168.1.84-85/24 netmask 255.255.255.0"
> >defaultrouter="192.168.1.1"
> >#ifconfig_nve0="DHCP"
> >usbd_enable="YES"
> >linux_enable="YES"
> >sshd_enable="YES"
> >
> >sendmail_enable="NO"
> >inetd_flags="-wW -a 192.168.1.84"
> >rpcbind_enable="NO"
> >
>
> Jim:  try the following:
>
> hostname="elrond.ameritech.net"
> ifconfig_nve0="inet 192.168.1.84 netmask 255.255.255.0"
> ifconfig_nve0_alias0="192.168.1.85 netmask 255.255.255.255"
> defaultrouter="192.168.1.1"
> #ifconfig_nve0="DHCP"
> usbd_enable="YES"
> linux_enable="YES"
> sshd_enable="YES"
>
> - Jeff
>
>