VoIP problems

[Predrag Punosevac]

Norberto Meijome wrote:
> On Sat, 25 Aug 2007 23:05:20 -0700
> Predrag Punosevac <punosevac at math.arizona.edu> wrote:
>
>   
>> I was perfectly able to hear people using Skype but they could not hear 
>> me so my conclusion was that sound card is not properly configured
>> Another indication was that I was not able to record using ossrecord or 
>> at least when I play back I do not hear anything.
>>     
>
> Predrag,
> what's the output of mixer ? 
>
> _________________________
> {Beto|Norberto|Numard} Meijome
>
> "The people have always some champion whom they set over them and nurse into greatness...
>  This and no other is the root from which a tyrant springs; when he first appears he is a protector."
>    Plato
>
> I speak for myself, not my employer. Contents may be hot. Slippery when wet. Reading disclaimers makes you go blind. Writing them is worse. You have been Warned.
>   
I am sending you two outputs. One is output of the native mixer and the 
second one is the output of the ossmix

[pedja at oko /usr/home/Pedja]$ mixer
Mixer pcm      is currently set to  68:68
Recording source:


[pedja at oko /usr/home/Pedja]$ ossmix
Selected mixer 0/
Known controls are:
        pcm <both/leftvol>[:<rightvol>] (currently 68:68)
        rear <both/leftvol>[:<rightvol>] (currently 48:48)
        rear.rec ON|OFF (currently OFF)
        center <both/leftvol>[:<rightvol>] (currently 48:48)
        center.rec ON|OFF (currently OFF)
        ext.spread ON|OFF (currently OFF)
        ext.loopback ON|OFF (currently OFF)
        ext.recordvol <monovol> (currently 128)
        ext.recordsrc <MIC|LINE> (currently MIC)
        vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> (currently 
Fast)
        vmix0-vol <monovol> (currently 25.0 dB)
        vmix0-out <leftVU>:<rightVU>] (currently 0:0)
        vmix0-out.pcm5 <monovol> (currently 25.0 dB)
        vmix0-out <leftVU>:<rightVU>] (currently 0:0)
        vmix0-out.pcm6 <monovol> (currently 25.0 dB)
        vmix0-out <leftVU>:<rightVU>] (currently 0:0)
        vmix0-out.pcm7 <monovol> (currently 25.0 dB)
        vmix0-out <leftVU>:<rightVU>] (currently 0:0)
        vmix0-out.pcm8 <monovol> (currently 25.0 dB)
        vmix0-out <leftVU>:<rightVU>] (currently 0:0)
        vmix0-in <leftVU>:<rightVU>] (currently 0:0)


I tried to play with that put I guess I am just ignorant.

Thanks
Predrag