locking down scsi device id's in 6.2

[Robert Marella]

On Fri, 6 Apr 2007 19:15:27 -0400
"Dave" <dmehler26 at woh.rr.com> wrote:

> Hello,
> I've got a situation where three devices, one a scsi tape drive and
> the other two ide burners under scsi emulation with atapicam are
> fighting for scsi id's and i'd like to lock them down to specific
> id's. When the tape drive isn't plugged in the burners get 000 and
> 010 scsi ids, but when the tape goes in it takes 050 and the burners
> are on bus2 200 and 210 respectively. I hope this makes sense. I've
> been over loader and device.hints as well and i'm lost. I'd
> appreciate any info on this. Thanks.
> Dave.
> 

Hello Dave

Have you looked at man scsi (4) for the correct way to
edit /boot/device.hints to wire down devices? 


HTH

Robert