Crash; shutdown

Wed Sep 20 07:05:52 PDT 2006

I have one system that also has an Nvidia video, after I update ports will 
crash if I don't rebuild the nvidia driver and X screensaver  The 
screensaver makes it crash otherwise.

         -Derek

At 06:33 PM 9/19/2006, Laurence Sanford wrote:
>So I got up and walked away from my computer this afternoon, and came back 
>to find it in the middle of shutting down. No good reason, no crash dump 
>(yes, they're configured) no nothing, just this:
>
>Sep 19 18:14:53 colossus syslogd: exiting on signal 15
>
>At this point, everything sync'd up and the system shut down, completely, 
>and powered off.
>
>I've had it suggested that this could be a power supply going south. Any 
>other ideas?
>
>
>
>
>
>
>uname:
>root at colossus(/var/log)# uname -a
>FreeBSD colossus.cotharyus.net 6.1-STABLE FreeBSD 6.1-STABLE #6: Sat 
>Sep  2 04:56:20 CDT 2006 
>lauasanf at colossus.cotharyus.net:/usr/obj/usr/src/sys/Colossus  i386
>
>
>dmesg:
>root at colossus(/var/log)# dmesg
>Copyright (c) 1992-2006 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>         The Regents of the University of California. All rights reserved.
>FreeBSD 6.1-STABLE #6: Sat Sep  2 04:56:20 CDT 2006
>     lauasanf at colossus.cotharyus.net:/usr/obj/usr/src/sys/Colossus
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2010.31-MHz 686-class 
>CPU)
>   Origin = "AuthenticAMD"  Id = 0x20fb1  Stepping = 1
>Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>   Features2=0x1<SSE3>
>   AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow>
>   AMD Features2=0x3<LAHF,CMP>
>   Cores per package: 2
>real memory  = 1073676288 (1023 MB)
>avail memory = 1037369344 (989 MB)
>ACPI APIC Table: <Nvidia AWRDACPI>
>FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
>ioapic0: Changing APIC ID to 2
>ioapic0 <Version 1.1> irqs 0-23 on motherboard
>acpi0: <Nvidia AWRDACPI> on motherboard
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi0: Power Button (fixed)
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>acpi_bus_number: can't get _ADR
>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
>cpu0: <ACPI CPU> on acpi0
>cpu1: <ACPI CPU> on acpi0
>acpi_button0: <Power Button> on acpi0
>pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
>pci0: <ACPI PCI bus> on pcib0
>pci0: <memory> at device 0.0 (no driver attached)
>isab0: <PCI-ISA bridge> at device 1.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
>ohci0: <OHCI (generic) USB controller> mem 0xdb102000-0xdb102fff irq 21 at 
>device 2.0 on pci0
>ohci0: [GIANT-LOCKED]
>usb0: OHCI version 1.0, legacy support
>usb0: SMM does not respond, resetting
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 10 ports with 10 removable, self powered
>ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfeb00000-0xfeb000ff irq 
>22 at device 2.1 on pci0
>ehci0: [GIANT-LOCKED]
>usb1: EHCI version 1.0
>usb1: companion controller, 4 ports each: usb0
>usb1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
>usb1: USB revision 2.0
>uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub1: 10 ports with 10 removable, self powered
>pcm0: <nVidia nForce4> port 0xd400-0xd4ff,0xd800-0xd8ff mem 
>0xdb101000-0xdb101fff irq 23 at device 4.0 on pci0
>pcm0: <Avance Logic ALC850 AC97 Codec>
>atapci0: <nVidia nForce CK804 UDMA133 controller> port 
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
>pci5: <ACPI PCI bus> on pcib1
>fwohci0: <Texas Instruments TSB43AB22/A> mem 
>0xdb004000-0xdb0047ff,0xdb000000-0xdb003fff irq 16 at device 11.0 on pci5
>fwohci0: OHCI version 1.10 (ROM=1)
>fwohci0: No. of Isochronous channels is 4.
>fwohci0: EUI64 00:11:d8:00:00:86:18:47
>fwohci0: Phy 1394a available S400, 2 ports.
>fwohci0: Link S400, max_rec 2048 bytes.
>firewire0: <IEEE1394(FireWire) bus> on fwohci0
>sbp0: <SBP-2/SCSI over FireWire> on firewire0
>fwohci0: Initiate bus reset
>fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
>firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
>firewire0: bus manager 0 (me)
>nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xd000-0xd007 mem 
>0xdb100000-0xdb100fff irq 21 at device 10.0 on pci0
>nve0: Ethernet address 00:15:f2:7f:80:86
>miibus0: <MII bus> on nve0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
>1000baseT-FDX, auto
>nve0: Ethernet address: 00:15:f2:7f:80:86
>pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
>pci4: <ACPI PCI bus> on pcib2
>pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
>pci3: <ACPI PCI bus> on pcib3
>pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
>pci2: <ACPI PCI bus> on pcib4
>pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
>pci1: <ACPI PCI bus> on pcib5
>nvidia0: <GeForce 6800> mem 
>0xd8000000-0xd8ffffff,0xd0000000-0xd7ffffff,0xd9000000-0xd9ffffff irq 18 
>at device 0.0 on pci1
>nvidia0: [GIANT-LOCKED]
>acpi_tz0: <Thermal Zone> on acpi0
>fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
>fdc0: [FAST]
>sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
>sio0: type 16550A
>ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 
>on acpi0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/16 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>ppbus0: IEEE1284 device found /NIBBLE/ECP
>Probing for PnP devices on ppbus0:
>ppbus0: <HEWLETT-PACKARD DESKJET 810C> MLC,PCL,PML
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xd0000-0xd3fff on isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio1: configured irq 3 not in bitmap of probed irqs 0
>sio1: port may not be enabled
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
>ukbd0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 
>2, iclass 3/1
>kbd1 at ukbd0
>uhid0: Microsoft Natural\M-. Ergonomic Keyboard 4000, rev 2.00/1.73, addr 
>2, iclass 3/1
>umass0: Generic USB Storage Device, rev 1.10/1.00, addr 3
>ums0: Microsoft Microsoft Trackball Optical\M-., rev 1.10/1.21, addr 4, 
>iclass 3/1
>ums0: 5 buttons and Z dir.
>uhub2: vendor 0x05e3 USB Hub, class 9/0, rev 1.01/0.12, addr 5
>uhub2: 4 ports with 4 removable, bus powered
>Timecounters tick every 1.000 msec
>ad0: 43979MB <IBM DTLA-307045 TX6OA6AA> at ata0-master UDMA100
>ad1: 190782MB <Seagate ST3200822A 3.01> at ata0-slave UDMA100
>ad2: 38166MB <WDC WD400BB-22CAA0 16.06V16> at ata1-master UDMA100
>acd0: DVDR <LITE-ON DVDRW SOHW-832S/VS01> at ata1-slave UDMA33
>SMP: AP CPU #1 Launched!
>cd0 at ata1 bus 0 target 1 lun 0
>cd0: <LITE-ON DVDRW SOHW-832S VS01> Removable CD-ROM SCSI-0 device
>cd0: 33.000MB/s transfers
>cd0: Attempt to query device size failed: NOT READY, Medium not present
>da0 at umass-sim0 bus 0 target 0 lun 0
>da0: <Lexar USB Storage-SMC 0180> Removable Direct Access SCSI-0 device
>da0: 1.000MB/s transfers
>da0: Attempt to query device size failed: NOT READY, Medium not present
>da1 at umass-sim0 bus 0 target 0 lun 1
>da1: <Lexar USB Storage-CFC 0180> Removable Direct Access SCSI-0 device
>da1: 1.000MB/s transfers
>da1: Attempt to query device size failed: NOT READY, Medium not present
>da2 at umass-sim0 bus 0 target 0 lun 2
>da2: <Lexar USB Storage-MMC 0180> Removable Direct Access SCSI-0 device
>da2: 1.000MB/s transfers
>da2: 489MB (1002497 512 byte sectors: 64H 32S/T 489C)
>da3 at umass-sim0 bus 0 target 0 lun 3
>da3: <Lexar USB Storage-MSC 0180> Removable Direct Access SCSI-0 device
>da3: 1.000MB/s transfers
>da3: Attempt to query device size failed: NOT READY, Medium not present
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
>(da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
>(da0:umass-sim0:0:0:0): SCSI Status: Check Condition
>(da0:umass-sim0:0:0:0): NOT READY asc:3a,0
>(da0:umass-sim0:0:0:0): Medium not present
>(da0:umass-sim0:0:0:0): Unretryable error
>Opened disk da0 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0
>(da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
>(da1:umass-sim0:0:0:1): SCSI Status: Check Condition
>(da1:umass-sim0:0:0:1): NOT READY asc:3a,0
>(da1:umass-sim0:0:0:1): Medium not present
>(da1:umass-sim0:0:0:1): Unretryable error
>Opened disk da1 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>(da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0
>(da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error
>(da3:umass-sim0:0:0:3): SCSI Status: Check Condition
>(da3:umass-sim0:0:0:3): NOT READY asc:3a,0
>(da3:umass-sim0:0:0:3): Medium not present
>(da3:umass-sim0:0:0:3): Unretryable error
>Opened disk da3 -> 6
>_______________________________________________
>freebsd-questions at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>
>--
>This message has been scanned for viruses and
>dangerous content by MailScanner, and is
>believed to be clean.
>MailScanner thanks transtec Computers for their support.
>

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.