Help Me!

[Nguyen Tam Chinh]

Hello,

Please try the 6.1 or 6.2-PRERELEASE. I doubt that the 6.0 does not 
support PerC 5/I driver.
If you want 6.0, please copy the mfi.ko to /boot/kernel and load it as a 
kernel module as boot by adding to /boot/loader.conf something like:
mfi_load="YES".
Hope that this helps.

On Mon, 27 Nov 2006, Phan Quoc Cao wrote:

> I installed FreeBSD 6.0 on PowerEdge 2950, so if I retry to boot, but RAID
> PerC 5/I card not detected hard disk drives.
>
> I had to use mfi.ko driver for PERC 5/I by Selected Load KLD thought floppy
> included mfi.ko driver then the install process is normal, but after that I
> reboot machine, the filsystem not received and announced the following:
>
>
> Manual root filesystem specification:
>
> <fstype>:<device>  Mount <device> using filesystem <fstype>
>
>            e.g. ufs:/dev/da0s1a
>
>   ?                  List valid disk boot devices
>
>   <empty line>       Abort manual input
>
> mountroot>
>
> Who anyone can help me?
>
> Thanks and best regards!
>
>
>
>
>
>
> <http://609473.sigclick.mailinfo.com/sigclick/04020B02/05014E05/07014E04/422
> 26222.jpg>
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"
>

-----
With best regards,          |            The Power to Serve
Nguyen Tam Chinh            |          http://www.FreeBSD.org
Loc: sp.cs.msu.su           |