dge-530T Gigabit Ethernet Adapter

[Freesbie]

Hi,

I am using FreeBSD6.0(6.0-RELEASE FreeBSD 6.0-RELEASE #1). I just bought two dge-530T gigabyte ethernet cards and installed them in my computer. I have sk compiled into my kernel, but on boot they are not recognized. Is there any additional steps I need to take? My kernel config file(PCI-Ethernet Portion) as well as pertaining snippet of dmesg are below. When doing a sysinstall to add a new network interface it is also not listed.

Thank you for your time in reading this message.

Freesbie

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device          miibus          # MII bus support
#device         bfe             # Broadcom BCM440x 10/100 Ethernet
#device         bge             # Broadcom BCM570xx Gigabit Ethernet
#device         dc              # DEC/Intel 21143 and various workalikes
#device         fxp             # Intel EtherExpress PRO/100B (82557, 82558)
#device         lge             # Level 1 LXT1001 gigabit Ethernet
#device         nge             # NatSemi DP83820 gigabit Ethernet
#device         nve             # nVidia nForce MCP on-board Ethernet Networking
#device         pcn             # AMD Am79C97x PCI 10/100(precedence over 'lnc')
device          re              # RealTek 8139C+/8169/8169S/8110S
device          rl              # RealTek 8129/8139
#device         sf              # Adaptec AIC-6915 (``Starfire'')
#device         sis             # Silicon Integrated Systems SiS 900/SiS 7016
device          sk              # SysKonnect SK-984x & SK-982x gigabit Ethernet
#device         ste             # Sundance ST201 (D-Link DFE-550TX)
#device         ti              # Alteon Networks Tigon I/II gigabit Ethernet
#device         tl              # Texas Instruments ThunderLAN
#device         tx              # SMC EtherPower II (83c170 ``EPIC'')
#device         vge             # VIA VT612x gigabit Ethernet
#device         vr              # VIA Rhine, Rhine II
#device         wb              # Winbond W89C840F
#device         xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')

Dmesg Snippet
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network, ethernet> at device 9.0 (no driver attached)
pci1: <network, ethernet> at device 10.0 (no driver attached)
pci1: <simple comms> at device 11.0 (no driver attached)