Simple DNS For Private LAN
Drew Tomlinson
drew at mykitchentable.net
Wed Jun 28 18:03:27 UTC 2006
On 6/28/2006 7:43 AM Giorgos Keramidas wrote:
> On 2006-06-23 14:26, Drew Tomlinson <drew at mykitchentable.net> wrote:
>
>>> If you use NAT, then I can guide you through setting up a local
>>> ``master zone'' that is only visible inside your home network, and a
>>> ``slave zone'' that pulls stuff from ZoneEdit for the
>>> ``mykitchentable.net'' domain. I already have a similar setup at
>>> home, to let my internal systems (workstation, laptop) see each other
>>> with internal names and still use my ISP's name servers for
>>> everything else.
>>>
>>> If you don't use NAT, things are going to be much easier, since you
>>> only have to set up the names at ZoneEdit and pull the master zone
>>> from there.
>>>
>> Thank you for your reply.
>>
>
> You're welcome of course :-)
>
>
>> I use NAT for my servers that are visible from the outside so I set
>> ZoneEdit to return the same address for all servers at
>> mykitchentable.net which is currently 67.137.238.101.
>>
>
> Excellent! This is exactly what I was hoping the setup would be.
>
>
>> Thus www.mykitchentable.net, drew.mykitchentable.net,
>> mykitchentable.net, and whatever else. all return 67.137.238.101.
>> Based up this, it seems that I should leave ZoneEdit alone and set up
>> a local "master zone" visible only to my private LAN as you describe
>> above. Being a slave and pulling from ZoneEdit wouldn't have any
>> benefit as the public address won't equal the private address.
>>
>
> Quite right.
>
>
>> So assuming I understand correctly, yes, please guide me in setting up
>> a local master zone.
>>
>
> Assuming that your local home network uses addresses in the
> 192.168.0.0/16 range, you have to set up a local name server which will
> recognize and reply for the following zones:
>
> "drew." # "*.drew" are local home network names
> 192.168.0.* # reverse IP address -> name for home hosts
> 127.0.0.* # localhost zone (optional)
>
I use virtual servers with Apache. To access those from the inside, I
have to use the same URL as is used on the outside. So from the
Internet, I need drew.mykitchentable.net to resolve to my public IP but
on the inside, I need it to resolve to 192.168.0.x. Thus it seems to me
that the .drew zone won't work for my setup. Or am I missing something?
Can I set up my server to be authoritative for .mykitchentable.net
instead of .drew but only be visible from the inside? Obviously if it
responded to queries from the Internet, I'd really have a mess. What do
you recommend?
Thanks again for your help!
Drew
[lots of useful step-by-step config info snipped]
--
Be a Great Magician!
Visit The Alchemist's Warehouse
http://www.alchemistswarehouse.com
More information about the freebsd-questions
mailing list